LEGO Horizon Express 10233 - User Manual

10233 Horizon Express
Welcome to text-based instructions from LEGO for the Blind. Before you start building, here are some
terms we’ll be using:
Front: towards you.
Back: away from you.
Up: towards the ceiling.
Down: towards the floor.
Stud: the bump on a Lego brick. Example: A 2x1 brick has two studs on it.
Vertically: going from front to back.
Horizontally: going from left to right.
Upright: pointing up towards the ceiling, and down towards the floor.
Symmetrically: a mirror image. Example: If you place a 2x1 brick with technic connector on the
front wall at the right, connector to the front, and then place another such piece symmetrically on
the back wall, at the right, the technic connector of the second piece should point to the back,
since it will be placed symmetrically.
There are also abbreviations defined at the end of this file.
Fly down the track in the Horizon Express!
Book 1. Engine.
Book 2. passenger car.
Book 3. Cafe/dining Car
Book 1.
Make a minifigure, it’s a girl with gray pants, blue shirt, striped, orange-gray vest and long braided hair.
Bag 1.
Put a 28x6 with two holes hor on the table.
Put a F 4x2 ver on the right edge, in the middle, overhanging to
the right.
Bag 2.
Put a 3x2 hor to the left, in the middle.
Put a 6x1 hor in the right back corner.
Repeat symm at the front.
Put a 6x1 ver to the left of the two PPs.
Put a 2x1 hor to the left, at the back edge.
Repeat symm at the front.
Put a 3x2 hor to the left and to the back.
Repeat symm at the back.

LEGO Horizon Express 10233 Specifications

General

Set Number	10233
Name	Horizon Express
Theme	Creator Expert
Pieces	1351
Minifigures	6
Release Year	2013
Product Line	LEGO Creator Expert
Dimensions	58.2 x 37.8 x 8.7 cm
Model Number	10233

Summary

Book 1: Engine Assembly

Bags 1-7: Core Engine Construction

Initial assembly and construction of the engine section using bags 1 through 7.

Bags 8-14: Engine Detailing & Patterns

Adding details, patterns, and components to the engine using bags 8 through 14.

Bags 15-19: Engine Exterior & Cabin

Assembly of the engine exterior and cabin sections using bags 15 through 19.

Book 3: Car Assembly

Bags 1-7: Core Car Construction

Initial assembly and construction of the car section using bags 1 through 7.

Bags 8-14: Car Detailing & Components

Adding details and components to the car using bags 8 through 14.

Bags 15-19: Car Exterior & Windows

Assembly of the car exterior and windows using bags 15 through 19.

Bags 20-24: Car Specific Parts

Assembly of various car-specific parts using bags 20 through 24.

Bags 25-28: Final Assembly & Roof

Final car assembly, wheels, and roof construction using bags 25 through 28.