LEGO RACERS2 - Car and Character Builders; Car Builder Controls; Building Your LEGO Car

Car- and Character-Builders
In LEGO
®
Racers 2, it’s easy to build the racing car of your dreams! There
are lots of LEGO bricks with which to build. You can also create your LEGO
driver too. When you select Builder from the Main Menu, you will be
offered two choices.
Car Builder
Controls
Cycle through bricks/brick categories Left and Right Arrow Keys
Move bricks Arrow Keys
Delete brick/Cancel/Back Esc
Select brick/brick category Enter
Select previously placed brick 2 on Number Pad
Select next placed brick 8 on Number Pad
Rotate brick a quarter turn (90°) 4 on Number Pad
left/anti-clockwise
Rotate brick a quarter turn (90°) 6 on Number Pad
right/clockwise
In the Car Builder, you can choose a
pre-built car, or build your own vehicle.
First select a set of bricks with which to
build – they’re organized by the world
they belong to and they become
available if you can reach that world in
the Adventure mode.
To select a pre-built car, choose the
picture of a garage from the bar at the
top of the screen using the Left and Right
Arrow keys, and press Enter. Use the
keys again to cycle through the models and press Enter again. Choose the ✓
symbol, and press Enter one more time.
Car building is very easy, and Sparky is always on hand to help. Cars are built
from the chassis up (a chassis is the name for a car’s wheel base). Only the
top layer of bricks can be altered. If you need to change a brick that sits
below others, all the bricks on top of it must be deleted. At first, only the
chassis category is available – choose one using the Left and Right
Arrow keys and press Enter. Chassis cannot be moved or rotated.
After choosing your chassis, you can place 19 more bricks. You can
see the number of bricks you have left at the bottom of the screen.
8