Need help?Do you have a question about the LEGRAND bticino MyHOME Smarther XW8002 and is the answer not in the manual?
General| Model | XW8002 |
|---|---|
| Brand | LEGRAND bticino |
| Connectivity | Wi-Fi |
| Operating Mode | Heating, Cooling |
| Product Type | Smart Thermostat |
| Display | LCD |
| Communication Protocol | Wi-Fi |
| Weight | 150 g |
| Compatibility | MyHOME |
| Control | App |
| Temperature Range | 5°C to 35°C |
| Power Supply | 230V AC |
| Operating Temperature | 0°C to 40°C |
| Humidity Range | 20% to 80% RH |
How to activate the Boost function for immediate heating.
Steps for flush-mounting the device.
Installation details for flush-mounting with 503E boxes.
Installation details for flush-mounting with 502PB boxes.
Steps for wall-mounting the SXW8002W model.
Electrical diagrams for connecting the device.
Wiring diagram for systems using a clean contact for boiler activation.
Wiring diagram for heating systems with a mains voltage load.
Wiring diagram for heating and cooling with floor systems.
Wiring diagram for heating and cooling with diverse system types.
Comparison of functionalities when the device is standalone vs. connected to the app.
How to activate the temporary heating boost function.
Overview of controlling the Smarther using the dedicated mobile application.
Instructions on how to download the mobile application.
Steps to register and create a user account for the app.
Preparations needed for iOS users before associating the device.
Guide to linking the Smarther device with the app.
Steps for associating the Smarther on Android devices.
Steps for associating the Smarther on iOS devices.
Changing account data or replacing it with another Legrand account.
Instructions for setting the target temperature for a single device.
Activating an 'away' mode to save energy while maintaining a minimum temperature.
Managing home and device settings within the app.
Defining the geographical position of the home.
Setting the correct time zone for accurate operation.
Options for renaming, moving, or deleting the Smarther.
Selecting and configuring the heating algorithm for efficiency.
Renaming a Netatmo thermostat valve.
Moving a thermostat valve to a different room.
Removing a thermostat valve from the system.
Viewing and selecting the actual measured temperature.
Creating new custom heating or cooling schedules.
Changing account data or replacing it with another Legrand account.
Resetting Wi-Fi and HomeKit settings to default.
To Next Page
