Need help?Do you have a question about the LEGRAND bticino MyHOME Smarther SXG8002 and is the answer not in the manual?
General| Brand | LEGRAND |
|---|---|
| Model | bticino MyHOME Smarther SXG8002 |
| Category | Thermostat |
| Language | English |
Instructions for activating the Boost function on the Smarther device or app.
Guide on how to adjust the desired temperature using the device or the app.
Steps for installing the Smarther in flush-mounted boxes.
Detailed guide for flush-mounting with 503E electrical boxes.
Installation steps for flush-mounting with 500 electrical boxes.
Installation steps for flush-mounting with 502PB electrical boxes.
Instructions for wall-mounting the SXW8002W model of the Smarther.
Explanation of the main touch screen interface elements.
Details on temperature, humidity, Wi-Fi, and reset indicators.
Meanings of icons for OFF, heating/cooling, manual, and boost modes.
Symbols for temperature setting keys and Wi-Fi connection status.
Identification of connection terminals on the rear of specific models.
Schematics for connecting the Smarther for heating systems.
Wiring diagram for systems with floor heating and cooling.
Wiring diagram for systems with separate heating and cooling.
Wiring for heating systems using a clean contact (e.g., boiler).
Wiring for heating systems with loads controlled by mains voltage.
Specifications including power, absorption, and operating conditions.
Safety instructions regarding handling and installation of the device.
Precautions related to electrical shock and proper installation.
Comparison of functions available on the device versus the mobile application.
Summary of core functions like Boost, temperature setting, and modes.
Overview of settings like Wi-Fi, display, and sound, accessible via the app.
Details on creating and managing daily/weekly temperature programs.
Detailed explanation of how to use the Boost function for immediate heating.
Steps to locally set the temperature in manual mode.
Procedure to display the measured humidity level on the Smarther screen.
Overview of requirements for controlling the Smarther via the Home + Control app.
Guidance on establishing the Wi-Fi connection before device association.
Note on OS-dependent configuration procedures for Android and iOS.
Steps to connect to the home Wi-Fi network and enter the password.
Confirmation steps for a new Smarther installation.
Steps to assign a custom name to the Smarther device.
Procedure for scanning or manually entering the HomeKit setup code.
Entering HomeKit code manually and detecting the Smarther.
Renaming, assigning rooms, and managing Smarther within HomeKit.
Choosing pre-defined scenarios to include the Smarther in HomeKit.
Initiating the guided process to create a new temperature program.
Defining wake-up and sleep times for weekdays.
Specifying if lunch breaks are taken during the week.
Setting time intervals for weekends, including Saturday and Sunday presence.
Procedure for accepting an invitation to access a Smarther system.
Steps to follow to recover a forgotten password via email.
Process for authenticating your account after registration or password change.
Overview of Home Page elements for temperature and humidity monitoring.
Description of controls for single devices, rooms, and the whole home.
Instructions to set temperature and activate boost for one device.
Setting room temperature and activating boost for all devices in a room.
How to set the Absent function to maintain a minimum temperature and save energy.
How to activate a pre-configured program for all home devices.
Accessing and modifying home, room, and device settings.
Setting location, time zone, energy source, home type, and dimension.
Setting home position and enabling automatic geolocation.
Selecting the correct time zone for accurate scheduling.
Inputting the size of the home.
Renaming existing rooms and procedures for room deletion.
Navigating to the page for managing Smarther device options.
Options to rename, move, or delete the Smarther device.
Choosing the heating algorithm based on system type.
Enabling/disabling Smarther's touch interface and physical keys.
Configuring sound and vibration feedback for key presses.
Configuring hysteresis for temperature stability based on system type.
Selecting how the display brightness adjusts based on ambient light.
Manually setting display brightness levels.
Steps to change the Smarther's Wi-Fi network connection.
Viewing serial number, firmware, radio signal, and battery level.
Initiating the valve calibration process.
Assigning a custom name to the Netatmo valve.
Selecting the temperature displayed that best represents room temperature.
Using the guided procedure to create a new temperature program.
Function to duplicate and modify existing temperature programs.
Steps to change the name of an existing temperature program.
Adjusting start and end times for program intervals.
How to choose and activate a desired program.
Steps to delete existing temperature programs.
Copying a day's program profile to other days of the week.
Creating personalized temperature set points with custom names.
Adjusting temperatures for existing set points.
Steps to delete custom set points not used in active programs.
Demonstration of how to modify an existing program with specific settings.
Configuring the default duration for manual temperature settings.
Enabling automatic calculation for reaching target temperatures.
Displaying graphs of Smarther and valve activity.
Accessing guest management to add or delete users.
Steps to invite new users to manage the Smarther system.
Procedure for sending invitations to control home devices.
Finalizing the removal of a user's access to the Smarther.
Choosing the brand and model of the device to add.
Initiating the association process for a Smarther device.
Choosing Netatmo valves to pair with the Smarther.
Inserting batteries and confirming valve detection.
Naming the valve and assigning it to a room.
Choosing which home to view and manage after installation.
Customizing the smartphone's Home page with quick access buttons.
Finding answers to frequently asked questions about the app.
Accessing account details, security, and communication preferences.
Changing account data or replacing it with another Legrand account.
Granting permission for Legrand communications and app usage data sharing.
Accessing terms of use and privacy policies for associated apps.
Displaying and removing access rights for connected third-party applications.
Action to delete Wi-Fi configuration and HomeKit settings.
Operation to restore factory settings, deleting programs and associations.
Using third-party apps for voice control of Smarther functions.
Controlling Smarther via the HomeKit app for enhanced Smart system functions.
Steps to link the Smart system with the HomeKit app.
Renaming, assigning rooms, and managing Smarther within HomeKit.
Choosing pre-defined scenarios to include the Smarther in HomeKit.
To Next Page
