9190
Smarther
User and installation manual
In this section it is possible to set the default time during which the manual temperature setting
function will remain active. It is also possible to activate the self-adaptive forecast of the time
required for reaching a certain temperature at a certain time.
Thermal comfort
1
2
1. Touch to open the Settings menu
2. Touch to access the Thermal comfort page
3. Scroll to set the default time during which the temperature manual setting function will
remain active.
4. Scroll to set the default time for the duration of the boost function.
5. Touch to access the function that automatically calculates in how long the programmed
temperature will be reached..
3
4
5
6. Touch to activate the function; by default, the system is started 30’ before the set time. The
correct value will then be calculated based on the environmental parameters.
The final result is that the set temperature will be reached exactly at the programmed time.
7. Touch to confirm
6
7
To Next Page
Loading...
Need help?
General
