LEGRAND Arteor Series

To Next Page

N 292375/02

5722 63 / 5727 63

Arteor

230V~ 50/60Hz

0,35W

16A 250V AC µ cos ϕ = 1

- 10°C … +70°C

0°C … +40°C temporary,

7°C … 40°C

∆ K

±2K

1,5…4mm

1,5…2,5mm

20m

Safety notes

This product should preferably be installed by a qualified electrician. Non-compliance may result in a fire hazard or electric shocks.

Before installation, read the operating instructions and observe the product-specific requirements for the installation location. Use only original

spare parts for repair and maintenance. All Legrand products may be opened and repaired only by specially trained Legrand personnel. Unauthorised opening and repair

by other persons will invalidate all claims for liability, replacement or warranty services.

GB IE

• The load has to be connected to the same phase as the thermostat (L).

0,35

4…1,5

2,5…1,5

Operating principle, Type 1-B. EN 60 730-1

Degree of contamination: 2

Rated impulse voltage: 4 kV

•

N L

230V~

50/60 Hz

+50

+25

+30

°C

Off

Max.

Min.

Max. 25°C…50°C

Min. 7°C…30°C

•

Need help?

Do you have a question about the LEGRAND Arteor Series and is the answer not in the manual?

LEGRAND Arteor Series Specifications

General

Brand	LEGRAND
Series	Arteor
Category	Thermostat
Display	LCD
Accuracy	±0.5°C
Power Supply	230V AC
Frequency	50Hz
Output	Relay output
Installation	Wall-mounted
Dimensions	86mm x 86mm
Color	White
Certification	CE