LEGRAND VANTAGE CC-STAT

To Next Page

Communicating Thermostat

Installation Instructions

No: IS-0685– rev. 2 5/23

CC-STAT

Country of Origin: Made in China

FEATURES AND OPERATION OVERVIEW

OVERVIEW

The CC-STAT Vantage Communicating Thermostat provides the comfort and energy

efciency your customers expect with easy installation and full InFusion integration.

The CC-STAT may function as a stand-alone HVAC thermostat; however, the system

user will experience enhanced and simplied control when the CC-STAT is integrated

with the InFusion system. LCD interfaces and touchscreens provide the interface and

the CC-STAT, installed near the HVAC system, provides the control.

When combined with the Thermostat Interface Station, this multi-function thermostat

is compatible with most residential HVAC systems, including single stage, heat pump,

multi-stage and control of humidier and dehumidier systems.

• One thermostat for all applications - works with single-

stage, heat pump, multi-stage and control of humidier and

dehumidier systems

• On-board relative humidity sensor congurable to control

humidier and dehumidier

• Communicates with InFusion controller, Vantage

touchscreens, and mobile apps for remote operation and

feedback

• Direct connection of outdoor or indoor sensors

• Allows for temporary override of Vantage System without

altering initial programming

• Automatic set points controlled through the Vantage System

• Backward compatible

Description Specication

Dimensions

4.9375” H x 6” W x 1.3125” D (125.4mm H x 98.4mm W x 49.2mm D)

Model CC-STAT

Power Draw Maximum 86.4 mA rms – This value is with 24 VAC input voltage and backlight ON

Power Draw Typical 21.6 mA rms – This value is with 24 VAC input voltage and backlight OFF

Power Input 18-30 Vac (24VAC nominal), 50/60Hz

Maximum Load Per Terminal 1 Amp

Maximum Load All Terminals 2.5 Amp

DC Power

3.0 Volts DC (2 “AA” Alkaline batteries included

Compatible Systems Standard gas, oil, electric, single stage/heat pump/multi-stage

Terminal Designations Rc, R, W, Y, G, C, S1, S2, O, B, L, W2, Y2, T1, T2, C, B, O, Y, Y2, G, RC, R, W2, WL, S2,

S1, T1, T2, A-, B-, A+, B+, RSA, RSB

Rated Output Current 0.001 A to 1 A continuous per output with up to 5 A surge (half cycle)

Control Range 45º to 99ºF (7º to 32ºC)

SPECIFICATIONS

Need help?

Do you have a question about the LEGRAND VANTAGE CC-STAT and is the answer not in the manual?

The Vantage CC-STAT is a communicating thermostat designed to provide comprehensive control over HVAC systems, offering both stand-alone functionality and integration into Vantage's InFusion system. It supports multi-stage heating, heat pump, multi-stage cooling, and dehumidifier systems, making it suitable for a wide range of residential and commercial applications. The device features a large touch screen with adjustable backlight for easy interaction and clear display of information.

Function Description

The CC-STAT serves as a central control point for HVAC systems, allowing users to manage temperature, humidity, and fan operation. It can operate as a stand-alone HVAC thermostat or integrate seamlessly with Vantage's InFusion system, enabling advanced control and monitoring through touchscreens, keypads, and mobile apps. This integration provides a unified control experience, allowing users to manage their environment from various interfaces.

Key functions include:

Temperature Control: Maintains desired temperature settings for heating and cooling.
Humidity Control: Manages humidity levels for dehumidification and humidification.
Fan Control: Offers various fan modes, including auto and continuous operation.
Multi-Stage System Support: Compatible with multi-stage heating, cooling, and heat pump systems, optimizing energy efficiency.
Scheduling: Supports programmable schedules for different times of the day and week, allowing for automated temperature and humidity adjustments.
Network Override: Allows for temporary changes to scheduled settings, useful for unexpected events or occupancy changes.
Remote Sensor Support: Can connect to outdoor and remote indoor temperature sensors for more accurate readings and control.
System Test Menu: Provides a diagnostic tool for installers to test heating, cooling, auxiliary, fan, humidifier, and dehumidifier equipment.

Important Technical Specifications

Dimensions: 4.9375" H x 6" W x 1.3125" D (125.4 mm H x 98.4mm W x 49.2mm D)
Power Draw Maximum: 86.4 mA rms - This value is with 24 VAC input voltage and backlight ON.
Power Draw Typical: 21.6 mA rms - This value is with 24 VAC input voltage and backlight OFF.
Power Input: 18-30 VAC (24VAC nominal), 50/60Hz.
Maximum Load Per Terminal: 1 Amp.
Maximum Load All Terminals: 2.5 Amp.
DC Power: 3.0 Volts DC (2 "AA" Alkaline batteries included).
Compatible Systems: Standard gas, oil, electric, single stage/heat pump/multi-stage.
Terminal Designations: RC, R, W, Y, G, C, S1, S2, O, B, L, W2, Y2, T1, T2, C, B, O, Y, Y2, G, RC, R, W2, WL, S2, S1, T1, T2, A-, B+, A+, B, RSA, RSB.
Rated Output Current: 0.001 A to 1 A continuous per output with up to 5 A surge (half cycle).
Control Range: 45°-90°F (7°-32°C).
Display Range: 32° to 99°F (0° to 40°C).
Accuracy: ± 1°F (± .5°C).
Storage Temperature: -30° to 140°F (-34.4° to 60°C).
Operating Humidity: 5% to 90% relative humidity.
Operating Ambient Temperature: 32° to 120°F (0° to 48.9°C).
Shipping Temperature Range: -30° to 140°F (-34.4° to 60°C).
Typical Control Accuracy: ± 1°F at 68°F / ± 0.5°C at 20°C.
System Requirements: Each Vantage thermostat requires a thermostat interface, RadioLink or WireLink.
Certifications: UKCA, CE.

Usage Features

The CC-STAT is designed for user-friendliness with its intuitive interface.

Large Touch Screen: Provides a clear and interactive display for settings and information.
Adjustable Backlight: Enhances visibility in various lighting conditions.
Message Center: Displays feedback and instructions, guiding users through operations and providing important alerts.
Programmable Fan Control: Allows for customized fan operation, contributing to comfort and energy savings.
Easy Temperature Control: Simple interface for adjusting temperature setpoints and scheduling.
Progressive Recovery: Optimizes system startup to achieve desired temperatures at scheduled times, improving comfort and efficiency.
Built-in Compressor Protection: Helps prevent damage to HVAC equipment, extending its lifespan.
Battery Back-up: Ensures settings and schedules are retained during power outages.
Universal System Compatibility: Works with a wide range of HVAC systems, making it versatile for various installations.
Configurable for Humidifier or Dehumidifier: Supports both humidification and dehumidification control, providing comprehensive environmental management.
InFusion System Integration: When connected to the Vantage InFusion system, the CC-STAT can be controlled from any InFusion interface, including touchscreens, keypads, and mobile apps, offering a seamless smart home experience. This allows for advanced programming, event-based automation, and remote access.

Maintenance Features

The CC-STAT incorporates features to simplify maintenance and ensure long-term reliability.

System Test Mode: A dedicated installer setup menu allows for testing of all connected HVAC equipment, simplifying troubleshooting and commissioning.
Error Codes: The thermostat displays specific error codes to help diagnose issues, such as sensor errors or equipment malfunctions.
Air Filter Alarm: Notifies users when it's time to change the air filter, promoting healthy indoor air quality and efficient system operation.
Water Panel Alarm: For humidifiers, this alarm indicates when the water panel needs replacement, ensuring optimal humidifier performance.
Humidifier Alarm: Alerts users to humidifier maintenance needs.
Dehumidifier Alarm: Alerts users to dehumidifier maintenance needs.
HVAC Alarm: Provides general alerts for HVAC system issues.
Firmware Updates: The device supports firmware updates, ensuring it remains current with the latest features and improvements.
Battery Replacement: Easily accessible battery compartment for replacing the two "AA" alkaline batteries, which provide backup power.
Troubleshooting Guide: The manual provides a comprehensive troubleshooting section to address common issues like a blank display, temperature setting problems, or equipment not responding.

The CC-STAT is a robust and versatile thermostat solution, offering advanced control, ease of use, and integration capabilities for modern HVAC systems.