EasyManua.ls Logo

LEGRAND In One Sagane 845 42 User Manual

LEGRAND In One Sagane 845 42
12 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Branchement
Caractéristiques
N0064FS9/02
Alimentation 1 pile lithium CR 2032
Fréquence RF 868,3 Mhz
Portée environ 200 m en champ libre
+ 5°C à + 45°C
Configuration d’usine
A la première mise sous tension l’appui sur les touches 1, 2, 3 ou 4 ne commande aucun produit
de l’installation “In One by Legrand”.
Sagane™
Interscénario radio
845 42
Question and Answer IconNeed help?

Do you have a question about the LEGRAND In One Sagane 845 42 and is the answer not in the manual?

LEGRAND In One Sagane 845 42 Specifications

General IconGeneral
Model number845 42
CategorySwitch
BrandLEGRAND
ModelIn One Sagane
ColorWhite
MaterialPlastic
Number of Buttons1
Voltage Rating250V
IP RatingIP20

Summary

Product Characteristics

Power Supply

Specifies the device uses a 1 lithium CR 2032 battery.

Radio Frequency

Indicates the device operates at 868.3 Mhz.

Range

States the wireless range is approximately 200 m in free field.

Operating Temperature

Defines the operating temperature range from +5°C to +45°C.

Connection

Installation Diagram

Illustration showing how to connect the device.

Factory Setting

Initial Operation

On first power-up, buttons 1-4 do not control any products.

Replacing the Battery

Procedure

Step-by-step illustration for replacing the battery.

Declaration of Conformity

R&TTE Directive Compliance

Declares compliance with EU Directive 1999/5/CE "R&TTE".

Applicable Standards

Lists standards EN 60669-2-1 and EN 300220-3 for conformity.

Device Description

Component Identification

Identifies control buttons, RF communication, indicator lights, and ID numbers.

Mounting onto Rocker Plates

Mounting Procedure

Shows pictograms for mounting the device onto rocker plates.

Operation

Scenario Control

Explains how the switch acts as a scenario leader, controlling lighting, heating, etc.

Learning Procedure Reference

Refers to page 11 for the scenario learning procedure.

Scenario Management

Learning a Scenario

Step-by-step guide to start, add actors, and record a scenario.

Modifying a Scenario

Steps to open, modify actor state, and record scenario changes.

Clearing Scenarios

Instructions for clearing linked scenarios or resetting to factory configuration.

Related product manuals