9
PROBLEM CAUSE SOLUTION
The Learn indicator lights up for 5
seconds.
Learning is impossible. Install compatible products.
The Learn indicator lights up for 10
seconds.
The number of memorised transmitters
is greater than 32.
Delete unused scenarios.
During learning, the Learn indicator
light no longer blinks.
Learning mode switches itself off after
10 minutes (if no action is taken).
Restart learning.
During learning, pressing on the
programmed control button does not
cause the Learn indicator light to blink
quickly.
After pressing the learn button, learning
of the Function button must be done
within the next minute.
Restart learning.
When the scenario is saved, the Learn
indicator lights of certain receivers do
not go out.
Poor communication between products. Reduce the distance between the
transmitter and the receiver(s), then
restart learning or add a repeater.
To Next Page
Loading...
Need help?
General
