LE12415AA
RJ45、RJ11 socket
Presentation
This product should be installed in compliance with installation rules, preferably by a qualified electrician.
Safety instructions
Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions.
All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or
repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
-20 ...+70
-5 ...+50
≥40mm
Wiring
UTP STP
UTP STP
Cat 5e
Cat 6
EIA 568 A
1 2 3 4 5 6 78
1 2 3 4 5 6 78
EIA 568 B
Peel off outer sheath about 50mm in length.
50 mm
U/UTP
Turn the lock according to the direction
shown in the diagram to separate the cover.
2 811 58xx/2 811 59xx/2 811 60xx/2 811 61xx/2 811 62xx xx:MW MB MG DS DB CH BA BB BC
2 811 58xx yy/2 811 59xx yy/2 811 60xx yy/2 811 61xx yy/2 811 62xx yy
2 811 63xx/2 811 64xx/2 811 65xx/2 811 66xx yy:MY SG
2 811 63xx yy/2 811 64xx yy/2 811 65xx yy/2 811 66xx yy
1
To Next Page
Need help?
General
