EasyManua.ls Logo

LEGRAND Trimod 10 kVA User Manual

LEGRAND Trimod 10 kVA
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Trimod®
Operating and Maintenance Manual
®
Part. LE05768AA-07/12-01 GF
Question and Answer IconNeed help?

Do you have a question about the LEGRAND Trimod 10 kVA and is the answer not in the manual?

LEGRAND Trimod 10 kVA Specifications

General IconGeneral
BrandLEGRAND
ModelTrimod 10 kVA
CategoryUPS
LanguageEnglish

Summary

1 Foreword

1.1 Overview

Introduction to the LEGRAND® UPS Trimod® product and its benefits.

1.2 Purpose of the manual

Provides guidance for safe usage and routine maintenance of the equipment.

2 Technological description

2.1 Technology Trimod®

Overview of the Trimod® UPS technology, modularity, expandability, and redundancy.

2.2 Features

Highlights key features like redundant modular architecture, yield, expandability, and reliability.

2.4 Communications device

Details on RS232 ports, relay interface, logic level interface and communication slots.

3 Safety provisions

3.1 General notes

General safety warnings and precautions for operating the equipment.

3.4 Individual protective gear

Essential personal protective equipment (PPE) required for safe operation.

3.5 Indications of danger in the work place

Information on workplace safety signs and on-board equipment warnings.

3.7 General warnings

Important warnings regarding energy radiation, maintenance, and handling.

3.8 Emergency interventions

General guidance on first aid and fire prevention measures for emergencies.

5 Installation

5.1 Safety rules and regulations

Essential safety rules and regulations for UPS installation.

5.2.1 Safety recommendations

Critical safety checks and precautions before commencing installation.

5.2.8 Connecting the power supply

Final safety step: connecting the power supply cables after all other connections.

5.3 Wiring diagrams

Electrical configuration diagrams for various input/output connections.

6 Configuration and Start-up

6.3 Checks prior to switching on

Pre-startup checks including breaker status, wiring, and input parameters.

6.4 Starting procedure

Step-by-step guide for configuring and starting up the UPS unit.

7 Control Panel

8. Diagnostics

8.1 Luminous and acoustic signals

Interpreting status indicators, power module LEDs, and acoustic signals.

8.2 Messages

List of messages displayed on the unit and their likely causes.

9. Maintenance

9.3.1 Preparing the UPS for maintenance. Forced bypass mode.

Steps to prepare the UPS for maintenance by enabling forced bypass mode.

Related product manuals