Lehle DUAL EXPRESSION User Manual

13
LEHLE GmbH · Germany · www.lehle.com · support@lehle.com
onto the base plate. Now drill at the site
of the later screw holes a hole with a di-
ameter of approximately 2.5 mm (1/10
inch).
Then turn in two of the four screws to-
gether with the washers just halfway.
Slowly slide the LEHLE DUAL
EXPRESSION with the holes under
the screw heads of the screws already
screwed in. Make sure that the washers
are placed between the bottom plate of
the LEHLE DUAL EXPRESSION and the
screw head to protect the paint.
Now you can turn in the remaining two
screws and spacers through the other two
mounting holes. Tighten those screws only
slightly, then fix the screws you first turned
in. This type of mounting is extremely sta-
ble and can also be easily removed.
For flexible solutions we recommend us-
ing 3M Dual Lock™ instead of velcro for
stability.
!
If you are using the velcro / Dual Lock™
method, please make a note of the serial
number from the bottom of the pedal be-
fore you cover it, in case you have a sup-
port question for us later and don‘t fancy
dismantling your board!

Lehle DUAL EXPRESSION Specifications

General

Brand	Lehle
Model	DUAL EXPRESSION
Category	Music Pedal
Language	English