Lehner Lifttechnik Stratos - User Manual

Explains the meaning of various symbols used in the manual for clear communication.

Specifies the criteria for individuals who are competent and qualified to operate the platform lift.

Details the intended environments and conditions for installing and using the platform lift.

Outlines the necessity for qualified personnel for installation, maintenance, and repairs.

Describes the procedure for safely taking the unit out of service for maintenance or cleaning.

Provides essential safety rules and precautions for the correct and safe operation of the platform lift.

Details the correct procedures and precautions for operating the platform lift safely and effectively.

Provides a visual diagram illustrating the main components and parts of the platform lift system.

Lists the technical data, dimensions, capacity, and performance characteristics of the platform lift.

Describes the function of barriers and ramps in preventing longitudinal falls during travel.

Explains the safety bottom's role in stopping the system upon contact with an obstacle.

Details how lateral contact bars prevent jamming in the direction of travel.

Explains the overload device that stops the system if the load capacity is exceeded.

Describes the function and operation of the emergency stop button for immediate system shutdown.

Details the alarm button used to summon assistance by sounding an emergency signal.

Explains the overspeed governor and safety gear mechanism that prevents free fall.

Describes the different beeper signals and their meanings related to parking, charging, and battery status.

Explains the function and location of the main power switch for connecting/disconnecting the system.

Describes the handset controls including directional buttons, emergency stop, and alarm button.

Details the function, operation, and activation of the radio remote controls for calling and sending the platform.

Explains how to bring the lift to the current location using call stations or remote controls.

Guides the user on how to safely board and position themselves on the platform.

Details the procedure for operating the platform and driving it to the desired stop.

Instructs on how to safely exit the platform and secure the system after use.

Provides general guidance and initial checks to perform when encountering operational issues or malfunctions.

Describes the procedure for manually moving the platform a short distance to a landing stop for passenger release.

Explains how to mechanically unlock and open a barrier to free a passenger when the platform is not at a stop.

Lists essential daily checks to ensure the platform lift operates safely and correctly.

Provides instructions and precautions for cleaning the platform lift unit.

Advises on checking if a post-installation inspection by a lift expert is required.

Details the process of documenting maintenance activities and checking system components.

Specifies checks for the main power switch, emergency stop, and call station controls.

Outlines checks for the smooth running and correct setting of barriers, ramps, and the motor.

Describes how to check the stopping function of safety bottoms and lateral contact bars.

Details checks for the safety gear and overspeed governor for proper function and anchoring.

Specifies visual inspection of rails and racks for wear and grounding of the rail system.

Covers visual inspection of carriage drive wheels for wear and roller guide checks.

Details checks for fastenings of the rail system and supports, including tightening bolts.

Explains checks for various mechanical switches like limit switches and catch switches for functionality.

Describes checks for the gearbox and drive motor, including wear, adjustment, and function.

Lists audible and visual signals used by the lift system for status indication.

Checks for the availability of technical documents and the emergency release key.

Information on required lubricants, operating fluids, and the importance of using original spare parts.

Provides details on fixing the rail system and refers to installation drawings and instructions.

Outlines procedures for dismantling and environmentally sound disposal of the lift system.