LEI Extras USB MMC/SD Card Reader User Manual

1
Pub. 988-0147-484
Installation Instructions for
USB MMC/SD Card Reader
For Use With MapCreate 6.3
These instructions will help you install your LEI Card Reader on your
computer. The card reader (sometimes called a card reader/writer or
card programmer) is designed for use with a USB port.
NOTE
Your package may include a USB1 or USB2 card reader. The USB1
readers have "MMC\SD CARD READER" on the label. The USB2
readers are labeled "2.0 MMC\SD CARD READER." When
prompted to select which driver to install, be sure to pick the driver
that matches the label on your reader.
This device acts like an additional removable disk drive under Micro-
soft

Windows

operating systems. It can read MMC (MultiMediaCard)
and SD (Secure Digital) cards. These are solid-state flash memory de-
vices about the size of a postage stamp.
Minimum requirements are: a computer equipped with a USB port; Mi-
crosoft

Windows

operating system versions 98/ME/2000/XP.
WINDOWS 98 CAUTION:
Some older PCs running Windows 98 or Windows 98SE may
have hardware issues that cause conflicts with USB ports.
Some of the symptoms include Windows shut down problems or
the system locks-up while performing various functions.
If you experience these problems after installing your card
reader, uninstall the card reader and its driver software. Then
visit the web site www.usbman.com for possible solutions.
NOTE: Before installing MapCreate 6.3, plug the card reader
into the USB port and let Windows recognize it and install the
card reader driver. Then proceed with MapCreate installation.
At the end of the process, MapCreate will install its own drivers
for USB1 or USB2. Follow the on-screen instructions.
If you are installing MapCreate 6.3, the install program will prompt
you to install the correct card reader drivers after MapCreate is in-
stalled. If you purchased this card reader separately, plug the card
reader into the USB port and let Windows recognize it and install the
card reader driver, then insert the CD provided with the reader and
follow these instructions:


LEI Extras USB MMC/SD Card Reader Specifications

General

Interface	USB
Supported Cards	MMC, SD
Plug and Play	Yes
Compatible Card Types	MMC, SD, SDHC
Supported Operating Systems	Linux

Summary

USB MMC/SD Card Reader Installation

Card Reader Overview and Requirements

Details on USB reader types (USB1/USB2) and minimum system requirements for installation.

Windows 98 USB Port Compatibility Warning

Caution regarding potential USB port conflicts on older Windows 98/SE systems.

Pre-MapCreate 6.3 Installation Steps

Instructions to plug in the card reader and let Windows recognize it before installing MapCreate.

Formatting MMC Cards

Compatibility Issues with Older MMCs

Explains potential incompatibility with MMCs formatted by parallel port readers.

MMC Reformatting Procedure

Step-by-step guide to reformat an MMC card using Windows, including format type selection.

Ejecting MMC/SD Cards Safely

Understanding USB Reader Ejection Differences

Explains unique Windows interaction with USB readers and file transfer indicators.

Safe Removal Procedure

Steps to safely eject the MMC/SD card using the Windows Eject feature and handling potential errors.

Full One-Year Warranty

Warranty Coverage and Limitations

Details the product warranty terms, exclusions, and remedies for defects or malfunctions.

Warranty Exclusions

Lists circumstances under which the warranty does not apply, such as improper installation or misuse.

Obtaining Service and Accessories

Customer Service Contact Information

Provides toll-free numbers and hours for obtaining service for Lowrance and Eagle products.

Accessory Ordering Details

Information on how to order accessories, including dealer locations and direct contact information.