To Next PageTo Next PageHow to focus Leica geovid HD-B Binoculars display?
If the display on your Leica Binoculars is not focused, the diopter compensation may not be precise. Repeat the diopter compensation process to correct this.
Why Leica geovid HD-B Binoculars don't show a focused display?
If the display on your Leica Binoculars is not focused, it might be due to imprecise diopter compensation. You should repeat the diopter compensation to correct this.
What to do if my Leica Binoculars display is flashing or no measurement is possible?
If the display is flashing or no measurement is possible on your Leica Binoculars, the cause may be the battery. Replace the battery to resolve this issue.
Why does the display "- - -" appear when measuring the range with my Leica Binoculars?
The "- - -" display when measuring range on your Leica Binoculars can appear due to several reasons: * The object may be outside the measuring range. * The object might not be reflective enough. * Poor ambient conditions, such as visibility issues, can also cause this.
How to fix the "Err" display on my Leica Binoculars?
The "Err" display on your Leica Binoculars indicates an error involving the memory card. Check if the memory card is working correctly and if the data saved on it is OK.
Why is the image not circular when viewing through Leica geovid HD-B Binoculars?
If you're not getting a circular image through your Leica Binoculars, it could be due to: * Your pupils not being correctly aligned with the eyepiece exit pupil. Try adjusting your eye position. * The eyepiece cup position is not correctly adjusted for use with or without glasses. If you wear glasses, twist the eyepiece cups. If you don't wear glasses, ensure they are flipped up.
What to do if Leica geovid HD-B Binoculars display flashing or no measurement possible?
If your Leica Binoculars display is flashing, or you cannot get a measurement, the cause might be a depleted battery. Replace the battery to resolve this issue.
How to get a circular image when viewing with Leica geovid HD-B?
If you're not getting a circular image when viewing through your Leica Binoculars, it could be due to: * Incorrect eye position: Adjust your eye position to align properly with the eyepiece exit pupil. * Eyepiece cup adjustment: Adjust the eyepiece cups to the correct position. If you wear glasses, twist the eyepiece cups. If you don't wear glasses, ensure they are flipped up.
General| Magnification | 10x |
|---|---|
| Objective Lens Diameter | 42 mm |
| Rangefinder | Yes |
| Ballistic System | Yes |
| Exit Pupil | 4.2 mm |
| Twilight Factor | 20.5 |
| Diopter Compensation | ±4 dpt |
| Waterproof | Yes |
| Housing | Magnesium |
| Close Focus Distance | 5 m |
| Fogproof | Yes |
| Weight | 8x42: 980g; 10x42: 980g; 8x56: 1150g; 10x56: 1150g |
| Rangefinder Range | 10 m |
| Close Focusing Distance | 5 m |
| Laser | Class 1 |
| Display | LED |
| Battery | 1 x 3V / CR2 |
| Lens Coating | AquaDura |
| Battery Life | Approx. 2000 measurements |
| Eye Relief | 8x42: 16mm; 10x42: 16mm; 8x56: 18mm; 10x56: 18mm |
