Leica M165 FC User Manual

Leica M165 FC
Leica M205 FA / M205 FCA
User Manual

Leica M165 FC Specifications

General

Brand	Leica
Model	M165 FC
Category	Microscope
Language	English

Summary

General Instructions

Safety Concept

Read the 'Safety concept' booklet for additional information about handling and care of the instrument.

Cleaning

Instructions on proper cleaning agents and techniques to avoid damage and contamination.

Servicing

Repairs must be performed by trained technicians using original spare parts.

Important Safety Notes

User manual

Describes individual modules, operational safety, maintenance, and accessories.

Special manuals

Lists user manuals for specific accessories like mercury burners and focus systems.

Symbols Used

Warning of a danger

Indicates important information that must be read and complied with.

Warning of hazardous electrical voltage

Highlights mandatory information regarding electrical hazards.

Danger due to hot surface

Warns against touching accessible hot surfaces like light bulbs.

Safety Instructions

Intended use

Specifies the intended use of the microscope modules, referring to the Safety Concept.

Place of use

Guidelines for the environment where the microscope should be used.

Responsibilities of person in charge of instrument

Ensures operation, maintenance, and repair by authorized personnel.

Safety Instructions (Continued)

Repairs, service work

Details on repairs, use of original parts, and power disconnection.

Transport

Instructions for shipping and packing microscope modules and components.

Health risks

Discusses potential health issues and ergonomic measures for users.

The Leica M Series for Fluorescence

Congratulations!

Welcome message congratulating the user on acquiring the new Leica M series stereo microscope.

A Step Towards Infinity

Discusses the historical development and technological advancements in stereo microscopy.

The Electronics: Comfort, Convenience and Safety for Your Experiments

Highlights the extensive use of electronics for enhanced functionality and user experience.

Maximum Compatibility

Objectives

Details on parfocal objectives and compatibility with previous Leica series.

Tubes

Information on the compatibility of new tubes with existing M series microscopes.

Eyepieces

Describes new M series eyepieces with audible and tangible feedback for adjustment.

Assembly

Assembling the Focusing Column for TL Bases

Step-by-step guide for connecting the focusing column to the base.

Motorized Focus: Restricting the Travel Path

Procedure to restrict the maximum travel path of the motorized focus.

Objective Nosepiece – Assembly

Instructions for assembling and mounting the objective nosepiece.

Objective Nosepiece – Adjusting Parfocality

Procedure to ensure parfocality between objectives for seamless focus.

Leica FluoCombi III

Preparations

Steps to prepare the FluoCombi III before assembly, including disconnecting power.

Assembly

Guide for securely attaching the FluoCombi III to the focusing column.

Adjusting the Parfocality

Procedure to set up the objective nosepiece for parfocality.

Transmitted-light Base Leica TL BFDF

Before First Use

Instructions for removing transport anchors before initial use.

Controls

Identifies the adapter plate, stage, and buttons for bright/dark field.

Operation

Details on light intensity, bright field, and dark field illumination.

Leica TL RC / Leica TL RCI

Controls

Identifies controls for illumination, USB, CAN bus, and lamp replacement.

The Deflection Mirror

Description of the built-in mirror for adjusting illumination angles.

Color Intensity and Temperature

Controlling color intensity and temperature using potentiometers or a USB mouse.

Leica IsoPro Manual Mechanical Stage: Assembly

Control assembly

Steps for assembling the control buttons and axis.

Mechanical stage assembly

Procedure to place and fix the mechanical stage onto the base.

Leica IsoPro Motorized Mechanical Stage: Assembly

Mechanical stage for X-Y stage control module

Connecting the mechanical stage motor and controller to the DCI box.

Cables: Connections

The terminals

Identifies terminals for auxiliary equipment, power, and PC connection.

Leica LED5000 MCI

Assembly

Instructions for installing the MCI illuminator using screws and connecting the cable.

Alternative Assembly

Procedure for fastening the MCI illuminator directly to the column.

Leica LED5000 RL: Assembly

Assembly (Continued)

Notes on optimum placement and connection of the ring illuminator.

Leica EL6000 – Safety Notes

General safety notes

Compliance with safety standards and consultation for modifications.

Electrical safety

Details on supply voltage, frequency, power consumption, and fuses.

Leica EL6000 – Preparations

Inserting the lamp

Procedure for safely inserting the lamp into the light source.

Leica EL6000 – Operation

Running-time meter

Measures lamp burning time and should be reset after lamp replacement.

Shutter control

Control options for the internal shutter (open or remote).

Quick Start Guide

The Fastest Route to Success

Introduction to the Quick Start Guide for initial setup and operation.

The Correct Interpupillary Distance

Instructions for adjusting the interpupillary distance for a single circular image.

Focusing

Explanation of the focusing drive and coarse/fine adjustment mechanisms.

Changing Magnification (Zoom)

Procedure for adjusting the magnification using the rotary knob.

Eyepieces

Health Notes

Information on potential sources of infection from direct contact with eyepieces.

Dioptric Correction

Instructions for using the built-in dioptric correction for eyeglass wearers.

Dioptric Correction and Parfocality

Combined procedure for setting diopters and parfocality for optimal viewing.

Photography & Video

Leica Application Suite

Overview of LAS software for image capture, microscope control, and analysis.

Photo Tubes and C-mounts

Details on C-mount interface and adapters for connecting digital cameras.

Objectives and Optical Accessories

The Different Types of Objectives

Description of achromatic, planachromatic, and planapochromatic objectives.

Bases

Leica TL ST Transmitted-light Base: Operation

Instructions for light intensity control and switching between bright/opaque transmitted light.

Leica TL BFDF Transmitted-light Base: Operation

Details on light intensity control and switching between bright and dark field illumination.

Leica TL RC / Leica TL RCI: Operation

Explanation of relief contrast settings and their effect on specimen images.

System Illumination

Leica LED5000 MCI

Description of the MCI illuminator, its use, preparation, and contact with base.

Leica LED5000 RL

Details on the RL ring light, its use, keyboard operation, and illumination scenarios.

Leica EL6000 – Troubleshooting

Guidance on diagnosing and resolving common faults with the EL6000 light source.

Fluorescence

Filter Changer

Description of the FLUOIII® filter system, including filter sets and holders.

About Fluorescence Microscopy (Only Applicable for Leica M205 FA)

Explains the functional principle of fluorescence microscopy and the M Series capabilities.

Equipping the Filter Changer

Instructions for removing dummy holders and inserting filters into the changer.

Accessories

Leica Hand Wheel and Foot Switch

Description of hand wheel for motor focus and foot switches for system control.

Leica SmartMove

Details on the SmartMove control unit for handling motorized instruments.

Leica SmartTouch

Overview of the SmartTouch touchscreen for experiment control and parameter adjustment.

Dimensional Drawings

Leica M165 FC

Diagrams showing dimensions of the Leica M165 FC with transmitted-light stand.

Leica M205 FA

Diagrams showing dimensions of the Leica M205 FA with various configurations.

Leica M205 FCA

Diagrams showing dimensions of the Leica M205 FCA with various configurations.

Specifications

Leica M165 FC / Leica M205 FA / Leica M205 FCA

Optical data, zoom range, resolution, working distances, and magnification values.

Leica EL6000 – Specifications

Dimensions, environmental conditions, operation, electrical safety, and lamp details.

Appendix

Calculating the Total Magnification and Field of View Diameter

Formulas and examples for calculating total magnification and field of view diameter.

Care, Maintenance, Contact Persons

Permitted measures

Guidelines for cleaning the microscope and its components using permitted agents.