Leica T-Scan 5 - Cable Connection EMC Precautions; FCC Statement (USA); FCC Compliance and Labelling

The status LED for the Laser Tracker shows:
•
the communication status between T‑Scan sensor and Laser Tracker
•
the measurement status of the T‑Scan system
Colour Pattern Status information
LED OFF - No communication between T‑Scan and Laser
Tracker.
Green Static Communication to Laser Tracker is established.
T‑Scan system is ready to measure.
Red Static Laser Tracker beam is not locked onto T‑Scan.
T‑Scan system is not ready to measure.
Yellow Static Communication to Laser Tracker is established.
T‑Scan measurement is in process.
Green Blinking Communication to Laser Tracker is established.
T‑Scan is in sleep mode.
The status LED for the T
‑Scan controller shows:
•
the status of the T‑Scan controller (ON/OFF)
•
the communication status between T‑Scan controller and T‑Scan sensor
Status LED for
Laser Tracker
Status LED for the
T‑Scan controller
14 T‑Scan Components