Need help?Do you have a question about the Leica Viva TS16 and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | Viva TS16 |
| Category | Measuring Instruments |
| Language | English |
Congratulations on the purchase of the Leica TS16. This manual contains important safety directions.
The model and serial number of your product are indicated on the type plate.
Lists registered trademarks like Windows and Bluetooth used in the product.
Lists available documentation like Quick Guide and User Manual.
Enables the person responsible and user to anticipate and avoid operational hazards.
Warning messages alert users to hazards and contain general rules of behaviour.
Defines the intended use and reasonably foreseeable misuse of the product.
Specifies suitable environments and limitations for product operation.
Outlines the duties of the manufacturer and the person responsible for the product.
Details various hazards associated with product usage, like dropping or electrocution.
Warns about the danger of electrocution near electrical installations.
Caution regarding extraneous targets being picked up in remote control mode.
Warning about increased risk of lightning strike when using accessories.
Caution about potential accidents due to lack of attention to surroundings.
Highlights dangers from unsecured working sites, especially in traffic.
Warning about potential eye injury or product damage from pointing at the sun.
Warns about fire hazards from improper mechanical influences on batteries.
Alerts to risks of leakage, fire, or explosion from battery exposure.
Caution regarding overheating and fire risk from short-circuited battery terminals.
Explains risks associated with improper product disposal, including hazardous gases.
Warns about injuries and destruction due to lack of repair knowledge.
Provides instructions and training information about laser safety.
General information on laser safety according to IEC standards.
Details laser classification and safety for distance measurement with reflectors.
Details laser classification and safety for distance measurement without reflectors.
Treats Class 3R laser products as potentially hazardous from a safety perspective.
Warns about hazards from reflected laser beams at various surfaces.
Describes the red laser pointer's functionality and safety classification.
Treats Class 3R laser products as potentially hazardous from a safety perspective.
Warns about hazards from reflected laser beams at various surfaces.
Details the safety classification of the Automatic Target Aiming feature.
Details the safety classification of the PowerSearch feature.
Describes the Electronic Guide Light feature and its safety classification.
Details the laser plummet's functionality and safety classification.
Warns that Class 2 laser products are not inherently safe for eyes.
Details the AutoHeight laser plummet's safety classification.
Warns that Class 2 laser products are not inherently safe for eyes.
Details the Laser Guide's functionality and safety classification.
Treats Class 3R laser products as potentially hazardous from a safety perspective.
Warns about hazards from reflected laser beams at various surfaces.
Explains the product's capability to function without causing disturbances.
Notes that electromagnetic radiation can cause disturbances in other equipment.
Warns that using third-party accessories may cause disturbances.
Caution regarding intense electromagnetic fields from sources like radio transmitters.
Warns about radiation exceeding limits due to improperly connected cables.
Alerts to potential disturbances and effects of radio/cellular devices.
Details FCC compliance for digital devices in the US.
FCC compliance statement for Class B digital devices.
Warns that unauthorized modifications can void the user's authority.
Compliance statement for Class B digital apparatus in Canada.
Introduces the main components of the TS16 system: instrument, controllers, software.
Defines key terms and abbreviations used throughout the manual.
Describes the Laser Guide feature and its application.
Explains Automatic Target Aiming and its functionality.
Details the PowerSearch sensor for rapid prism finding.
Describes the integration of GNSS systems to form a SmartStation.
Details the SmartAntenna component for SmartStation.
Describes the RadioHandle component for remote control.
Details the communication side cover with its ports and features.
Explains TS firmware, applications, and customized software options.
Provides instructions for uploading software to the TS instrument.
Recommends using Leica batteries, chargers, and accessories for functionality.
Explains data storage using memory devices like SD cards and internal memory.
Details the SD card, USB stick, and internal memory options.
Describes various methods for transferring data from the instrument.
Illustrates the contents of the instrument container (Part 1).
Illustrates the contents of the instrument container (Part 2).
Shows SmartStation/SmartPole accessories (Part 1).
Shows SmartStation/SmartPole accessories (Part 2).
Illustrates the contents for TS robotic pole setup.
Diagrams of the instrument's external components (Part 1).
Diagrams of the instrument's internal components (Part 2).
Details the ports and features of the communication side cover.
Shows components specific to the SmartStation setup.
Illustrates components used for remote operation.
Diagram identifying the parts of the laser guide.
Details the layout and function of the instrument's keyboard.
Describes the individual keys and their specific functions.
Explains how to use key combinations for various functions.
Outlines operating principles for both keyboard and touch screen input.
Describes how to perform operations using the touch screen interface.
Provides a step-by-step guide for setting up the TS instrument.
Details the procedure for setting up the SmartStation.
Explains the setup procedure for SmartPole configurations.
Guides the user through setting up remote control with RadioHandle.
Details the setup for remote control using the TCPS29/30.
Identifies the components that make up the GHT66 holder.
Step-by-step guide for attaching the field controller holder to a pole.
Procedure for safely detaching the field controller from its pole mount.
Instructions for mounting the CS35 tablet onto a holder and pole.
Explains how to connect the instrument to a PC for data synchronization.
Steps to remove older Leica USB drivers before installing new ones.
Procedure for installing necessary Leica USB drivers on a PC.
Step-by-step guide for connecting the instrument to a PC via USB.
Covers turning the instrument on/off and accessing power options.
Provides operating principles for battery usage, charging, and temperature.
Step-by-step guide on how to change the instrument's battery.
Guidelines for safe handling and use of memory devices like SD cards.
Procedure for inserting and removing an SD card from the instrument.
Procedure for inserting and removing a USB stick from the instrument.
Explains the basic status indicated by the RadioHandle's LED indicators.
Visual representation of the LED indicator locations on the RadioHandle.
Table detailing the meaning of each LED indicator status.
Provides tips and guidelines to ensure accurate measurement results.
Information on ATRplus functionality and prism lock mode for measurements.
Highlights the importance of regular instrument checks and adjustments for accuracy.
Lists instrument errors that can be checked and adjusted electronically.
Identifies instrument parts that require mechanical adjustment.
Tips for obtaining precise measurements during check and adjust procedures.
Table summarizing instrument errors and their adjustability.
Steps required to prepare the instrument for error determination.
Guides users to subsequent adjustment procedures based on their task.
Procedure for determining multiple instrument errors in one process.
Performing the first measurement face for calibration purposes.
Performing the second measurement face to calculate instrument errors.
Shows the number of runs completed and quality of adjustments.
Guides users to subsequent adjustment procedures based on results.
Procedure for determining and adjusting the tilting axis error.
Guides users to subsequent adjustment procedures based on results.
Procedure for adjusting the circular levels on the instrument and tribrach.
Procedure for adjusting the circular level on the prism pole.
Procedure for inspecting the instrument's laser plummet.
General steps and considerations for adjusting the laser guide.
Detailed step-by-step procedure for adjusting the laser guide.
Procedure for maintaining and servicing the instrument tripod.
Guidelines for transporting the equipment in the field, vehicles, and via shipping.
Recommendations for carrying the product safely in the field.
Guidelines for transporting the product securely in a road vehicle.
Instructions for shipping the product by rail, air, or sea.
Rules and regulations for transporting batteries, especially Lithium-ion.
Recommendations for storing the equipment and batteries properly.
Instructions for cleaning and drying the product, accessories, and cables.
Details the recommended inspection cycle for motorized instruments.
Specifications for available angular accuracies according to ISO 17123-3.
Describes characteristics of angular measurement.
Range specifications for distance measurement using reflectors.
Specifies ranges for different reflector types under various conditions.
Details accuracy specifications for different distance measuring modes.
Describes EDM principle, type, carrier wave, and measuring system.
Range specifications for reflectorless distance measurements.
Specifies ranges for R500 and R1000 reflectorless measurements.
Accuracy specifications for ISO17123-4 for different ranges.
Describes EDM characteristics including type, carrier wave, and system.
Specifications for laser dot size at various distances.
Range specifications for long range distance measurements.
Specifies ranges for long range measurements with standard prisms.
Accuracy specifications for Long Range measurements.
Describes EDM characteristics for Long Range measurements.
Specifications for ATRplus target aiming and locking functionality.
Ranges for ATRplus target aiming and locking with different reflectors.
Details prism lock speeds for tangential and radial movements.
Specifications related to prism searching functionality.
Specifications for the PowerSearch functionality.
Specifies ranges for PowerSearch with different reflectors.
Provides specifications for the optional LOC8 theft deterrence device.
Details the internal battery specifications for the LOC8 device.
Information on the tracking period for the LOC8 device.
Lists the interfaces supported by the LOC8 device.
Specifications for the integrated overview camera.
Provides information on SmartStation functionality and features.
Details the accuracy specifications for the SmartStation.
Describes the method, reliability, and range for SmartStation initialisation.
Lists the supported RTK data formats for SmartStation data reception.
Provides the physical dimensions of the SmartStation setup.
Contains detailed technical specifications for the Laser Guide feature.
Explains the basic concept and user adjustment for the Laser Guide.
Details the laser type and carrier wave used by the Laser Guide.
Specifies optical parameters like line of sight offset and focus distance.
Information on the product's compliance with national regulations.
Details FCC and EU compliance statements for the TS16 instrument.
Lists frequency bands used by Bluetooth and WLAN modules.
Specifies output power levels for Bluetooth and WLAN.
Details regulatory compliance for the RadioHandle.
Lists frequency bands for RH16 and RH17 RadioHandles.
Specifies the output power for the RadioHandle.
Details regulatory compliance for the LOC8 Theft Deterrence Device.
Information on the product's SAR compliance with exposure guidelines.
Lists frequency bands for GSM, WCDMA, WLAN, and GPS.
Specifies the output power for GSM and WCDMA.
Details antenna specifications and gain for various wireless technologies.
Regulations concerning Lithium batteries and safe product transport.
Overview of factors influencing the system's accuracy.
Factors affecting the accuracy of prism location determination.
Accuracy of angular measurements based on instrument type.
Accuracy specifications for distance measurement (EDM).
Accuracy specifications for automatic target aiming (ATRplus).
Centring accuracy for different types of prisms.
Specifications related to the instrument's telescope.
Angular accuracy specifications for the instrument's compensator.
Details sensitivity and resolution of leveling systems.
Key specifications of the instrument's keyboard.
Details the various connection ports on the instrument.
Provides the pinout configuration for the 5-pin LEMO-0 port.
Physical dimensions of the instrument with and without RadioHandle.
Weight specifications for the instrument and its components.
Data storage capacity and measurement count per MB.
Specifications for the AutoHeight laser plummet feature.
Specifications for the instrument's laser plummet.
Details the external supply voltage specifications.
Specifications for the GEB222 internal battery.
Operating and storage temperature ranges for the instrument.
IP rating for protection against environmental elements.
Information on humidity protection and condensation effects.
Additive constants and ATRplus/PS compatibility for reflectors.
Working range and position accuracy for the Electronic Guide Light.
Lists the automatic corrections applied by the instrument.
Explanation of scale correction and its components.
Factors influencing atmospheric correction like air pressure and temperature.
Describes the influence of air humidity on distance measurements.
Formulas for atmospheric correction, sea level reduction, and projection distortion.
Formula for reducing measurements to mean sea level.
Formula for calculating projection distortion.
Graphs showing atmospheric corrections based on temperature, pressure, and height.
Graphs showing atmospheric corrections based on temperature, pressure, and height.
Presents formulas for slope distance, horizontal distance, and height difference.
Specifies reduction formulas valid for different reflector types.
Formulas used for calculating distance measurements.
Details values displayed in the Averaging distance measuring program.
Formulas for calculating arithmetic mean and standard deviation of distances.
Terms and conditions governing the use of the product's software.
Information on open source software used in the product.
To Next Page
