Need help?Do you have a question about the Leica Zeno FLX100 and is the answer not in the manual?
General| Number of channels | 555 |
|---|---|
| Real-time accuracy (RTK) Horizontal | 8 mm + 1 ppm |
| Real-time accuracy (RTK) Vertical | 15 mm + 1 ppm |
| Post-processing accuracy (Static) Horizontal | 3 mm + 0.5 ppm |
| Post-processing accuracy (Static) Vertical | 5 mm + 0.5 ppm |
| Operating temperature | -40°C to +65°C |
| Ingress Protection | IP68 |
| GNSS signals | GPS, GLONASS, Galileo, BeiDou, QZSS |
| Tilt compensation | Yes |
| Polarization | RHCP |
| Axial Ratio | 3 dB |
| Impedance | 50 Ω |
| Connector Type | TNC |
Model and serial number are indicated on the type plate for contacting service.
Lists Quick Start Video QR code, Quick Guide, and User Manual for additional resources.
Directions to anticipate and avoid operational hazards for product users.
Explains DANGER, WARNING, CAUTION, and NOTICE signal words and their hazard levels.
Details intended use and reasonably foreseeable misuse of the product.
Specifies suitable environments and limitations for the product's operation.
Outlines responsibilities of Leica Geosystems and the product user.
Lists duties of the person responsible for product safety and adherence to instructions.
Details the risk of being struck by lightning and related precautions.
Warns about electrocution risks near electrical installations and precautions.
Explains hazards of improper disposal and necessary precautions.
Highlights accident risks due to user inattention during dynamic applications.
Discusses dangers of unsecured sites and necessary precautions.
Warns about risks from equipment not repaired by authorized centers.
Emphasizes the need for grounding power cables and outlets.
Warns against using the product when wet or in humid environments.
Warns about electric shock risks from opening the product or touching components.
Cautions against using unapproved accessories causing damage or battery explosion.
Advises maintaining a minimum distance from the body due to health risks.
Explains risks of damage or injury from unsecured accessories.
Warns about potential personal injury and damage from dropping the device.
Advises switching off the instrument and removing the battery before cleaning.
Details FCC compliance for Class B digital devices and potential interference.
States that unauthorized modifications void the user's authority to operate.
Provides an overview of the instrument's design, features, and software compatibility.
Illustrates pole setup using the AZ219 Pole Mount and GLS30 Carbon Pole.
Shows how to use the AZ220 Universal Handheld Tray with smartphones/tablets.
Details how to power the device on/off, reset it, and charge the battery.
Provides step-by-step instructions for attaching the antenna to a pole.
Explains the phase centre location for pole and handheld modes.
Guides users through configuring antenna settings in Zeno Mobile/Connect.
Step-by-step guide for setting up real-time corrections via RTK Profile Wizard.
Details the process for downloading, sending, and installing firmware updates.
Advises on safely carrying the product in vehicles, by rail, air, or sea.
Provides information on Li-Ion battery performance, charging, and storage conditions.
Instructions for cleaning and drying the product, container, and accessories.
Lists technical specifications for satellites tracked, channels, update rate, etc.
Details frequency bands, positioning accuracy, and reliability factors.
Specifies output power and technical details of the antenna.
Provides physical dimensions, weight, connector, mounting, system, and communication specs.
Covers power details, operating/storage temperatures, IP rating, humidity, and shock resistance.
Declares compliance with FCC Part 15 and European Directives.
Provides guidance on handling and shipping products with Lithium batteries.
Lists all parts included in the standard configuration of the product bundle.
Lists available accessories with their part numbers and descriptions.
Details specific package contents for handheld start packages with Zeno Mobile/third party.
Details specific package contents for pole start packages with Zeno Mobile/third party.
Outlines the terms of the software license agreement and user obligations.
To Next Page
