This document provides assembly instructions and warranty information for two products from Leigh Country: a Retro Metal Chair and a Retro Metal Table.
Function Description:
The Retro Metal Chair is a piece of furniture designed for seating. It features a classic retro aesthetic with a metal frame and a combination of metal and possibly a padded seat and backrest, though the material for the seat and backrest is not explicitly stated beyond being "metal chair." The assembly instructions detail the process of constructing the chair from individual components.
Important Technical Specifications:
- Item Numbers: TX 93486, TX 93488, TX 93487. These numbers likely differentiate between variations or colors of the chair.
- Components:
- Seat Panel (1 PC)
- Back Panel (1 PC)
- Leg/Frame Components (3 PCS, identified as items 3, 4, and 5 in the parts list)
- Hardware:
- M6-16 Bolts (A): 4 PCS
- M6-40 Bolts (B): 4 PCS
- Washers (C): 8 PCS
- Lock Washers (D): 16 PCS
- Nuts (E): 4 PCS
- Tools Included: A wrench is provided for assembly.
Usage Features:
The chair is designed for general seating purposes. The assembly process is straightforward, involving attaching the seat and back panels to the leg/frame components using the provided hardware.
Maintenance Features:
- Cleaning: Use a mild soap and rinse with water, then dry completely with a soft cloth.
- Storage: During long periods of non-use, store the furniture in a covered and dry place.
- Protection: For the least maintenance, use the chair under a covered area to protect it from elements.
Function Description:
The Retro Metal Table is a piece of furniture designed to provide a flat surface for various uses, such as dining, holding items, or as a decorative accent. Similar to the chair, it features a retro metal design. The assembly instructions guide the user through constructing the table.
Important Technical Specifications:
- Item Numbers: TX 93500, TX 93502. These numbers likely differentiate between variations or sizes of the table.
- Components:
- Tabletop (1 PC)
- Leg/Frame Components (4 PCS, identified as item 2 in the parts list)
- Hardware:
- Bolts (A): 4 PCS
- Bolts (B): 4 PCS
- Washers (C): 12 PCS
- Nuts (D): 12 PCS
- Tools Included: A wrench is provided for assembly.
Usage Features:
The table is designed for general use, providing a stable surface. The assembly process involves attaching the legs to each other and then securing the tabletop to the assembled leg structure.
Maintenance Features:
- Cleaning: Use a mild soap and rinse with water, then dry completely with a soft cloth.
- Storage: During long periods of non-use, store the furniture in a covered and dry place.
- Protection: For the least maintenance, use the table under a covered area to protect it from elements.
Assembly Instructions:
- Read Carefully: Users are instructed to read all instructions before beginning assembly.
- Parts Check: Ensure all parts and hardware are present before starting.
- Assembly Surface: Assemble the product on a non-marring and level surface to prevent damage.
- Tightening Bolts: Do not completely tighten all bolts and screws until the entire product (Chair or Table) is fully assembled. This allows for adjustments and proper alignment.
- Power Tools Warning: Assembly with power tools may void the warranty.
Limited Warranty (Non-Transferable):
- Coverage: A one-year limited warranty from United General Supply's (UGS) covers defects in material and workmanship under normal use and proper care for the original purchaser.
- Replacement Parts: Defective or missing parts will be sent free of charge for 30 days from the date of purchase. After 30 days, UGS is not responsible for missing parts or hardware. Freight, packaging, labor, and material charges to and from the customer service center are not covered.
- Exclusions: The warranty does not cover commercial purposes, abusive use, damage by modification, freeze damage, rust, fading, or issues caused by improper care.
- Contact for Defects: For minor defects or missing parts/hardware, contact customer service immediately upon purchase. Do not return the product to the store unless it is irreparable.
- Returns/Refunds: For returns and refunds, refer to the local store's return policy with proof of purchase.
- Warranty Claims: Proof of purchase (dated register receipt) is required for warranty claims.
Customer Service:
- Availability: Monday through Friday, 9:00 a.m. to 5:00 p.m. CST.
- Contact Information:
- Email: HELP@UGSCO.COM
- Phone: 1-877-87LEIGH (53444)
Distribution:
- Distributed By: United General Supply Co., Inc., Houston, TX 77036.
- Website: www.LeighCountry.com
Copyright:
- © 2018 UGS Co., Inc. All Rights Reserved.
To Next Page
Need help?
General
