Leitner Frankie - Installing the Backrest; Front View Back-rest Attachment; Front Padding Attachment; Rear View Back-rest Attachment

© Leitner 2016
View from the front: First make sure that the lower
part of the back-rest is attached to the back of the
seat (red rectangle). Then, attach front part of
backrest padding to the Velcro (arrows).
View from the back:
Open the two horizontal straps (S)
and attach the back part of the
backrest to the upright Velcro lines
(V). Then re-attach the horizontal
straps tightly to secure the backrest.
S
S
V
V
Installing the backrest