Need help?Do you have a question about the LEITZ PRADOVIT-F and is the answer not in the manual?
Instructions for removing and replacing the projector's protective cover.
Details on connecting the mains lead and remote control cable for operation.
Checking and connecting to the correct AC mains voltage supply for the projector.
Procedure for powering the projector on, off, and controlling the lamp and fan.
Using the remote control for slide movement and focusing.
Instructions for inserting, changing, and re-arranging slides within magazines.
Adjusting the projection lens for sharp images and levelling the projector.
Operating the slide changer manually after the projector is switched off.
Procedure for opening the lamp house for maintenance access.
How to remove the side panel for internal access and maintenance.
Steps for changing projection lamps, including voltage and type considerations.
Method for aligning the lamp filament for optimal image quality.
Guidelines for cleaning projector optics and surfaces to maintain performance.
Positioning the condenser for different slide sizes (24x36mm, 38x38mm).
Connecting the projector for control via magnetic tape for synchronized shows.
Specific connection details and features for the Pradovit-n model.
Setting voltage and cycle for the universal motor in Pradovit-f.
Information on selecting and changing projection lenses for different focal lengths.
Specifications for lamp types, voltage, and essential handling advice.
Table correlating focal length, projection distance, and screen image size.
Advice on screen selection and loading slides into interchangeable magazines.
To Next Page
General