Need help?Do you have a question about the LEITZ PRADOVIT-N and is the answer not in the manual?
Procedure for removing the projector cover for initial setup and after projection.
Instructions for powering the projector on and off, including lamp-only shutoff.
Using the remote control for advancing, reversing magazines, and focusing.
How to operate the projector's slide changer mechanism.
Steps for inserting and replacing slide magazines in the projector.
Method for reordering or correcting slide orientation while it's in the projector.
Process of adjusting the projection lens for the sharpest image on the screen.
Adjusting the projector height using milled screws for alignment and stability.
Operating the slide changer mechanism by hand after the projector is switched off.
Procedure to open the projector's lamp house cover for access to internal components.
Instructions on how to remove the side panel of the projector.
Steps for replacing the projector's projection lamp, including different types.
Method for aligning the lamp filament for optimal projection quality.
Guidelines for cleaning projector lenses, condensers, and other optical parts.
How to position the condenser for different slide formats for optimal illumination.
Information on coupling the projector with a magnetic tape recorder for slide control.
Details on connecting the low voltage pradovit-n model to the mains supply.
Setting up the pradovit-f with a universal motor for various voltage and cycle configurations.
Information on changing LEITZ projection lenses for different focal lengths.
Details on available projection lamps for the pradovit-f, including wattage and cap types.
To Next Page
General