Inserting and changing of the magazine.
Before inserting the mogazine the slide
changer must be positioned in the magazine
chamber. If this is not the case, give the
magazine transport button a short push. Push
the magazine into the opening at the back of
the pradovit until it engages.
After the last slide in a magazine for 30 or
50slides has been projected, the slide changer
automatically remains positioned in the maga-
zine chamber. The shutter hereby covers
the rays of projection. The projected maga-
zine is pulled out to the front of the pradovit
ond the next one is pushed in as before.
Re-arranging slides with the magazine
in the Projector.
Should it happen that a slide is not in the
right order or upsight down, it can be re-
arranged while the magazine is in the pro-
jector. The button operating the slide changer
on the remote control is depressed and one
can now shift the magazine at will by tur-
ning the magazine transport button back-
ward or forward. The individual slide can
then be taken out to be re-arranged.
7
To Next Page
Loading...