12
age referring to the dose per 2 coffees, the grinding time programmed and the
image of the grinder in action.
The grinder grinds the dose according to the set time. Wait until the grinding
is over, the message “OK” and then the grinder icon will appear on the LCC (9)
display. Remove the lterholder from the fork (8).
E.6. To grind any quantity of coffee continuously, press the switch (4) and keep
it pressed, the image referring to the “adding coffee” function will appear on
the LCC (9) display.
E.7. Check the grinding and the quantity per dose.
Note. Once the grinding has started, you can stop it before the set time, pressing the
switch (4).
Caution. e switch (4) is for: continuous grinding (keep it always pressed: maxi-
mum time 19 seconds); stopping the grinding once started before the set time; adding coee
once the grinding is over.
E.8 Eventual coffee rests can be removed from the removable drip tray (12) just
pulling it. The tray (12) is xed with magnets: removing and placing it back is really
easy and practical!
F
Regulate the chute
F.1 The grinder is equipped with an innovative adjustable coffee chute (10)
that precisely directs the coffee into any lterholder. If the ground coffee is not
delivered in the center of your lterholder, move the internal part of the chute
backwards/onwards with your ngers in order to center the fall of the ground
coffee into your lterholder.
G
Regulate the grinding
Note. e grinder has been set in the factory for a medium size grinding, ideal for
the grinding of most types of coee blends, available in the market.
Caution. Regulate the grinding ALWAYS and ONLY while the grinder is grinding.
G.1 Rotate the grinding wheel (3) to change the coffee granulometry. Rotate
the wheel clock-wise (towards the small points) to obtain a ner grinding, anti-
clock-wise for a coarser grinding.
Note. Micrometric regulation does not require any blockage.
To Next Page
Loading...
