LELY CENTERLINER S - Dismounting from the Tractor

6 DISMOUNTING FROM THE TRACTOR
- Lower the machine onto the floor by means of the tractor
hydraulics, or place it on a steady elevation (a pallet board,
for instance).
- Remove the locking pin from hole B (fig. 21) and retract
the ram totally. This will eliminate corrosion of the piston
rod.
- Switch off the tractor engine. Take the PTO shaft from the
tractor PTO.
- Place the PTO shaft in the parking chord (fig. 22).
- If applicable: remove the mechanical control lever from the
tractor cab.
- Dismount the top link from the CENTERLINER spreader.
- Dismount the lower arms from the CENTERLINER sprea-
der.
55
21
22