CAUTION
Cuts, injuries and/or re may result from non-compliance with all operating
procedures described within this instruction manual.
LEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • lemproducts.com LEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • lemproducts.com
GENERAL WARNINGS AND SAFETY INFORMATION
2 7
TIPS FOR OPERATION
IT IS IMPORTANT TO READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFEGUARDS PRIOR TO USE
1. Always ensure that the appliance is properly assembled and safely set up before use.
2. DO NOT leave the appliance unattended if it can be switched on and operated.
3. CAUTION: This appliance is not recommended for use near or by children or persons with certain
disabilities. Set up and store the appliance out of reach of children. When not in use, store device in a secure and dry
place out of reach of children.
4. Store appliance in upright position to extend life of motor.
5. The appliance must be connected to 120V AC electric supply only.
6. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug
will t in a polarized outlet one way. If the plug doesn’t t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. DO NOT modify the plug in any way.
7. DO NOT operate with a damaged cord or plug, after the unit malfunctions, has been damaged in any way
or if appliance has been immersed in water or other liquid. Return unit to LEM Products for assessment and repair.
8. Always unplug unit when not in use, when changing parts or cleaning.
9. Never unplug by pulling on the power cord, always pull directly on the plug itself.
10. DO NOT let cord hang over edge of table or counter, contact sharp edges or touch hot surfaces.
11. Indoor use only. To protect against the risk of electrical shock, never immerse the device in water and do
not expose the device to rain or moisture. WARNING: In the event the device should fall into water,
remove the plug from the wall socket before attempting to remove the unit from the water. If submergence occurs,
have the appliance examined by an authorized technician before use.
12. To protect against the risk of electrical shock, DO NOT use the appliance if your hands are wet or if you
are standing on a wet oor. DO NOT use the appliance if it is wet or moist. DO NOT operate this device with wet
hands or bare feet. DO NOT operate near running water.
13. The appliance is designed exclusively for domestic use and not for commercial purposes.
14. DO NOT use the appliance to grind bones, deep frozen food, hard items or non-food items.
15. Use the appliance with the supplied accessories only. WARNING: The use of attachments not recommended or sold
by the manufacturer may cause injury, damage to personal property, and may void warranty.
16. WARNING: DO NOT use while under the inuence of alcohol or drugs (prescription or non-prescription)
as these may impair user’s ability to properly assemble or safely operate the appliance.
17. The manufacturer declines any responsibility in the case of improper use of this product. Improper use of this product
voids the warranty.
18. Avoid contacting moving parts. Wait until all parts have come to a complete stop and disconnect from the power
source before removing any parts of the grinder.
19. WARNING: Never feed food into grinder by hand as serious injury may occur, always use provided meat stomper.
20. WARNING: DO NOT use ngers to scrape food away from the grinding plate while the grinder is running, doing so
may cause serious injury.
21. Thoroughly hand-wash all grinder parts in warm soapy water prior to use. DO NOT soak. NOT
DISHWASHER SAFE (discoloration may occur).
22. Tie back loose hair and clothing. Remove neckties, rings, watches, bracelets or other jewelry before operating the grinder.
23. DO NOT operate the grinder without the pan in place.
24. DO NOT run grinder without meat in the Grinder Head, severe damage to the Grinder Head and Auger could result.
25. Use grinder on a level, stable surface to prevent tipping. Never move the grinder while unit is in use.
26. WARNING: Knife and plates are SHARP! To avoid injury, use extreme caution when handling.
27.
SAVE THESE INSTRUCTIONS
Cord storage is under motor housing.
If the grinder is locked, turn grinder o, allow it to come to a
complete stop, then turn to the reverse “R” position. If this does
not unlock the grinder, turn the unit o, unplug the electrical
cord from the outlet and disassemble the grinder head and
remove the obstruction. Reassemble and continue grinding.
When assembling Drive Gear Kit always ensure the stud on
the gear (A) is alligned with the notch on the washer (B) and
that the at side of the silicone gasket (C) is against the auger.
A
C
B
To Next Page
Loading...
