Why does my LEMAN BDS610 motor slow down when sanding?
The motor of your LEMAN Sander might slow down if the timing belt is too tight, in which case you should decrease the tension. It can also happen if you are applying too much pressure on the workpiece. Try applying less pressure when sanding.
What to do if my LEMAN BDS610 Sander makes excessive noise?
Excessive noise from your LEMAN Sander can be due to a timing belt that is too tight. Try decreasing the tension. Also, the bearing might need oiling, so try oiling the bearing.
How to fix LEMAN BDS610 that does not operate?
If your LEMAN Sander isn't operating, first ensure it's properly plugged into a power outlet. If it is, the power switch might be defective and need replacement. A motor or wiring problem could also be the cause, in which case you should have a qualified electrician carry out the repair.
Why does wood burn while sanding with my LEMAN Sander?
Wood burning while sanding with your LEMAN Sander is likely because the sanding disc or belt is loaded with debris. Try cleaning or replacing the disc or belt.
To Next Page
General