8. Functions introduction
1) Daily data
The watch records daily calories, steps, distance data
as well as the total steps in 24 hours and in the past
seven days.
2) Heart rate monitoring
Before heart rate monitoring, first ensure that the
watch is properly worn on the wrist (optimal position
is one finger width above the wrist bone). Heart rate
monitoring requires the watch to be worn tightly to
avoid light leakage that may prevent effective
detection. During the monitoring process, the wrist is
required to remain motionless. When the monitoring
is completed, it will vibrates.
3) Blood pressure monitoring
The blood pressure monitoring requires the watch
to be worn tightly and the wrist should be kept still
during the testing. The monitoring time is about
one minute. There will be a vibration reminder
when it is finished.
4) Blood oxygen monitoring
The blood oxygen monitoring requires the watch to
be worn tightly and the wrist should be kept still
during the testing. The monitoring time is about
one minute. There will be a vibration reminder
when it is finished.
User M a n u al- En g l i s h
12
To Next Page
Loading...
