29
Maintenance Tips
• Always use a soft, cotton cloth and dilute non-abrasive cleaner or a mild detergent for cleaning the
exterior of the bike.
• Never use ammonia, acid-based, or petroleum-based solvents on any portion of the bike as it may
damage the nish.
Preventative Maintenance Schedule
Daily
• Before each use, make certain that the area around the bike is free of obstacles and any clutter that
may interfere with the pedal rotation.
• After each use, wipe down the surfaces of the
g•force RT digital to remove sweat and moisture.
• Wipe the face of the display console with a slightly damp, soft, cotton cloth. Avoid getting extra mois-
ture on the display console. Keeping the display console free of ngerprints and sweat will extend the
life of the console.
Regularly
• Thoroughly clean the housing of the bike.
• Clean the top of the pedal straps, accessory trays, saddle and seat back, and the display console.
• Check that pedals are securely tightened and inspect both pedals and pedal straps for wear.
• Inspect all assembly bolts for wear and ensure that they are su ciently tight.
Moving the g•force RT digital
To move the bike, simply lift the rear end of the bike and slowly push it forward to the desired location.
Use caution when moving the bike. The
g•force RT digital
is well-built and the stability
that you experience when riding the bike is due to its substantial weight. Use care and
additional help, if necessary, when moving the bike.
MAINTENANCE INSTRUCTIONS
To Next Page
Loading...