1. Regarding the lithium rechargeable battery
⚫ This Bluetooth Speaker has an internal, non–user replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it
charge for about 2 ~ 3 hours or until the battery icon shows the battery
is fully charged.
⚫ For maintain the battery life and performance, if speaker isn’t used for
a while, the battery might need to be recharged. Charge the battery at
least once every month.
2. To recharge the built-in battery:
⚫ Connect the Bluetooth Speaker’s “Micro USB socket (9)” with the
Computer’s USB port through USB cable. The battery icon will flash in
the lower right corner of the “LED (4)” screen, it is in charging.
⚫ Disconnect the USB cable when it is done.
Note :
The speaker contains a built-in temperature monitor sensor. If it senses
that the battery pack temperature is not in good condition it will control
and stop the charging function. The charging function will be
automatically restored when the detected battery pack temperature
returns to within normal limits.
This product has a bluetooth reception function, you can not transmit any
bluetooth sound with it: this means that you can receive wirelessly a
bluetooth sound signal from an external source like a smartphone.
1. Press and hold the “ (1)” button to turn on the device. A series of
tones will sound. If it is in clock mode, press the “M button (2)” to
switch to Bluetooth mode, the “ ” icon is fast blinking on display.
To Next Page
Loading...
