5
Operation Instructions
1. Long press master and slave “O” simultaneously for 2S to power on. Then the speakers will
be connected automatically with a beep sound and the indicator light of sub-master will keep
blue, the master’s indicator will continue to blink.
(Please turn off bluetooth on your device before TWS paired)
BASIC OPERATION
① Power Button/Multi-function Button
Long press ① for 2s to Power On/ OFF
Short press ① to play/pause during music playing
Short press ① on master speaker to answer/end an incoming call
Short press ① twice on master speaker to reject a call
Short press ① twice to disconnect bluetooth
Short press ① three times to disconnect TWS
② ③ Volume Button
Short press ② to turn the volume up/Long Press ② to next track
Short press ③ to turn the volume down/Long press ③ to previous track
Short press ② ③ simultaneously to turn On/Off the blinking white LED during music
playing
Note: Both speakers can be controlled mutually after paired.
If you are not able to connect two speakers successfully, long press ② ③ simultaneously of
each speaker for 3S to connect quickly.
INTERFACE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
