GENERAL OPERATION
STANDBY MODE
Press the STANDBY button to wake up the unit or turn to standby mode.
SELECT MODE
Press the MODE button to switch to one of the modes: CD, USB, FM, Bluetooth, or
Aux1/2. Press the CD/USB button on remote to select CD or USB mode, press the
AUX1/2 button on remote to select Aud-1 or Aud-2 mode.
VOLUME SETTING
Press the VOLUME+/- buttons or rotate the volume knob to adjust the volume.
MUTE THE SOUND
Press the MUTE button on remote control to mute the sound. Press again or press the
VOLUME+/- buttons to resume the volume level.
SKIP TRACKS
Press the PREVIOUS /NEXT button on remote control or on TOP panel to skip to
the previous or next track.
PLAY/PAUSE
Press the PLAY/PAUSE button to pause the playback, press again to resume.
ACCELERATE THE MUSIC
In USB or CD mode, press the / button on remote control to forward or reward the
music. Press repeatedly to resume the normal speed.
REPEAT MODE
Press the REP. button on remote control to repeat the song by once, press again to
repeat
all songs, press the third time to resume normal.
PROGRAM
In CD mode, press the PROG. button on remote control to enter the program setting
interface, “P :0100", use the digit NUMBER buttons to select the song you want to
program, (for store track 4 it has to press “0” + “4”). Then press the button to confirm
and start playing the music in the programmed order.
MO/ST BUTTON
In FM mode, press MO/ST button switch from stereo mode to mono mode.
Press again to switch back to stereo mode.
To Next Page
Loading...
Need help?
General
