14
SSID (the name of network device). Select the one you want to
connect.
For the wireless connection, input encryption is required in the
next step.
Standard encrypted network
To enter the network’s key, use the Navigation Control on the
device or direction keys on the remote control to move the cursor
through the characters and press to confirm. As each
character is selected, the key is displayed near the top of the
display.
There are three options accessible by turning the Navigation
Control on the device back before the first character – (BKSP), OK
and Cancel.
WPS encrypted network
WPS encrypted networks are identified by WPS at the
beginning of the network name when the device searches the
available AP. Use one of the following methods for connection:
o Push button
The device prompts you to press the connect button on the
router. It then scans for a ready Push Button Connect network
and connects.
To Next Page
Loading...
