What to do if my LENCO PA-45 Stereo System has power but no sound?
If your LENCO Stereo System has power but no sound, first, turn off the speaker and check all audio cable connections to ensure they are correctly connected. It might be that the RCA or 3.5mm audio input is wrongly connected. Also, check that the master volume isn't set to the minimum level. If it is, turn the master volume up to your desired level.
Why does my LENCO PA-45 make noise?
Noises from your LENCO Stereo System can be due to improper audio-cable connections or cross talk. First, turn off the speaker and check all audio cable connections to ensure they are correctly connected. If the cables are well connected, the noise might be caused by external cross talk from your audio equipment; try turning down the volume to resolve it.
How to fix a LENCO PA-45 Stereo System when there is no power and no sound?
If the power indicator is off and no sound is coming from your LENCO Stereo System, ensure the AC power button is turned on. Also, the battery may have run out of power. Connect the power cord to an AC 220V/50Hz outlet to test if the speaker is still working and to recharge the battery.
Why is my LENCO PA-45 whining when I use the microphone?
If your LENCO Stereo System whines when using the microphones, it could be because the MIC volume is too loud, or the microphones are too close to the speaker. Try turning down the MIC volume and keep the microphones at least 2 meters away from the speaker.
General| Brand | LENCO |
|---|---|
| Model | PA-45 |
| Category | Stereo System |
| Language | English |
To Next Page
