EasyManuals Logo

LENCO CR-16 User Manual

LENCO CR-16
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
- If the automatic tuning does not stop on the exact frequency
of the station, for example, it stops on 88.9 MHz instead of
88.8 MHz, use the manual tuning method to “ne tune” to the
exact frequency of the desired station.
HINTS FOR BEST RECEPTION
FM - To insure maximum FM tuner reception, unwrap and fully
extend the EXTERNAL FM WIRE ANTENNA for best FM radio
reception.
TO SET/RECALL RADIO STATION PRESETS
1. Press the << or >> button to select the desired radio station.
2. Press and hold the MEMORY button, the next available preset
memory number will ash on the LED display. (Note: “P01”
will ash in the display if you are programming presets for the
rst time.)
3. Press the << or >> button to change to the desired preset
number P01 thru P10.
4. Repeat steps #1 thru #3 to preset up to 10 FM stations.
5. To recall one of the preset stations already programmed,
tap the M+ button repeatedly until you reach the desired
preset number/radio station.
SLEEP TIMER OPERATION
The sleep timer allows you to turn the unit off after a designated
time has elapsed.
1. While listening to the radio, tap the SLEEP button and sleep
time ‘90’ (minutes) appears in the LED DISPLAY.
2. Repeatedly tap the SLEEP button to select a sleep timer of
90, 60, 30 or 15 minutes. Wait for about 10 seconds after your
selection for the unit to conrm the selection, the unit will play
for the selected length of time then turn itself ‘Off’
automatically.
3. To cancel the sleep timer, repeatedly tap the SLEEP button
until you see the current time in the LED DISPLAY after last
sleep timer option (15 minutes).
4. To turn the unit ‘Off’ before the selected sleep time, press the
POWER ON-OFF button at any time.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LENCO CR-16 and is the answer not in the manual?

LENCO CR-16 Specifications

General IconGeneral
Radio typeClock
Tuner type-
PLL synthesizerYes
Supported radio bandsFM, PLL
RMS rated power- W
Display typeLED
Product colorBlack, White
Battery packNo
Input voltage230 V
Apple docking compatibilityNot supported
Power sourceAC/DC
AC input frequency50 Hz
Power consumption (typical)5 W
Package weight800 g
Weight and Dimensions IconWeight and Dimensions
Width121 mm
Height68 mm
Weight760 g

Related product manuals