LENCO DAR-040 - Error Messages; Trouble Shooting

10
 Set date format - You can change the date format on the display.
Date format options:
 DD-MM-YYYY (default)
 MM-DD-YYYY
 Language - There have 4 languages option.
Language options: English/German/French/Italian
 Factory Reset - A factory reset clears all user defined settings, replacing them with the original default values, so time/date,
preferences/settings, DAB station list and preset stations are all lost.
 SW version - It shows the software version of the player.
Trouble Shooting
Problem:
Solutions:
The device does not turn on
Make sure the AC power cord is connected to the correctly.
The CD player does not play even when a CD is in place
Place the CD with label side up.
Clean the CD.
FM Hiss/DAB Burbling/intermittent cut-out/DAB No
stations available message
Check/move antenna. Move radio. Rescan local (high-strength) stations
only.
Error messages
Error messages
Meaning
‘Service not available’
No DAB reception.
‘Signal error’
The DAB signal has been interrupted.
‘No DAB Station’
The listed station cannot be found. (No Name): The current station does not broadcast an identity name.
‘No stations found’
No DAB stations are available, check aerial.
‘No Radio Text’
No RDS text information is available on this station.
‘No PTY’
No RDS programme type information is available.
‘No Name’
No RDS station name is being broadcast.