11
into DAB mode.
Auto Scan
1. If this is the first time the unit has entered DAB Mode, it will automatically start an ‘Auto Scan’ to
search for available stations. (Once DAB Mode has been used before, the unit will automatically select
the previously played station)
2. Hold the ENTER button to automatically start auto scan to search for available stations. During the
scanning process, the lower line of the display shows a bar graph indicating the progress of the scan.
Manual Scan
1.
Press the MENU key on main unit to enter the menu.
2.
Press the [ ] or [ ] button to select “Manual tune”, press the [ENTER] button to the service menu.
3.
Press [ ] or [ ] enter to tune in the desired channel. A graph will indicate the signal strength if you
press [ENTER]
4.
Press [MENU] or [ / ] to exit scan.
5.
If no stations are found, please ensure the aerial is extended and test the reception by doing another
auto scan in a different location.
DRC (Dynamic Range Control)
Dynamic Range Control (also known as DRC) is a technology used to help make quieter sounds easier to
hear in a noisy environment.
1.
In DAB menu, press the [ ] / [ ] button or / button on remote control to select “DRC”,
press the [ENTER] button to display “*” to the top right.
2.
DRC OFF - DRC is switched off, broadcast DRC will be ignored. DRC LOW - DRC level is set to 1/2 that
sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Press MENU to confirm the setting. The display will return to normal.
Prune (To Remove Stations That are Listed But Unavailable)
In DAB menu, press [ ] or [ ] to display the “Prune” submenu, press [ENTER] to select the Prune option.
System (DAB)
In DAB menu, press [ ] or [ ] to show the “SYSTEM” submenu, press the [ENTER] button to go to the
system settings.
1.
Language
Press [ENTER] to go to language selection; the default source language is English, the selected
To Next Page
Loading...
Need help?
General
