12
language will have ”*” displayed at the top right. Users may choose between English, French, Italian,
Deutsch, Polish, Nederlands, Espanol
2.
Factory Reset
Press [ENTER] to perform a factory reset. If you wish to perform the reset operation, push [ ] or
[ ] until “YES” is highlighted on the display and press [ENTER]. A full reset of your radio will be
performed. All presets and station lists will be erased.
3.
SW Version
Press [ENTER] to view DAB software version. Press Menu to stop displaying the software version.
*If there are no operations after 30 seconds, the display will return to normal.
Preset
1.
Preset Recall
In DAB menu, press [ ] or [ ] station select “Preset Recall”, then press [ENTER] to tune to the
stored in preset memory. Or press PROG. Button (11) of the remote control.
Note: If you have not previously stored a preset station and the preset button is pressed, “Empty
preset” will be displayed.
2.
Preset Store
You may store your preferred DAB stations to the preset station memories. There are 50 memory
presets in your radio. Presets are remembered by your radio in the event of a power failure.
In DAB menu, select [Preset store] with and , then press [ENTER]. Press the “previous or next”
buttons to select a storage space， then press [ENTER] to confirm the desired preset number under
which you will store the station you are currently playing. Press [ENTER] to confirm.
FM Radio
Carefully extend the telescopic aerial to its full length.
Auto Scan
1.
Rotate the MODE knob to select “FM Mode”.
2.
Long Press button, and your radio will scan and stop automatically when it finds a station of
sufficient signal strength.
3.
After a few seconds, the display will update. The display will show the station frequency. If the signal
is strong enough and the station signal contains RDS data, then the radio will display the station name.
4.
To find other stations, press and hold the button as before.
5.
To scan the FM band in the opposite direction (high frequencies to low frequencies), press the
button and hold for 2 seconds.
To Next Page
Loading...
Need help?
General
