LENCO DVD-305 - Trouble Shooting

TROUBLE SHOOTING
18
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
Under no circumstances should you
try to repair the player yourself, as
this will invalidate the warranty. Only
qualified service personnel can
remove the cover or service this
player.
NO POWER
• Check if the on/off button on the front
of the player is set to ON.
• Check if the AC or DC power plug of
the mains unit is properly connected.
• Check if there is power at the AC or DC
outlet.
• Check if the battery is properly
connected to the DVD unit or if the
voltage of the battery is too low.
NO PICTURE
• Select the correct TV or AV input.
• Check the video connection.
DISTORTED PICTURE
• Check the disc for fingerprints and clean
with a soft cloth, wiping from centre to
edge.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
COMPLETELY DISTORTED PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
NO COLOR IN PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
THE DISC DOES NOT PLAY
• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by
trying another disc.
NO SOUND
• Check the audio connections.
• If using a HIFI amplifier, try another
sound source.
DEVICE DOESN’T RETURN TO the
START-UP SCREEN WHEN THE DISC
IS REMOVED
• Press
power to turn off the unit, then
press it again to turn on the unit.
THE PLAYER DOES NOT RESPOND TO
THE REMOTE CONTROL
• Aim the remote control directly at the
sensor on the front of the player.
• Avoid all obstacles which may interfere
with the signal path.
• Inspect or replace the remote control
batteries.
DISTORTED OR B/W PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
BUTTONS DO NOT WORK
• Turn the player off and on with the
power on/off button on the side of the
player.