Sort
LCN (Logical channel number)
Video Setting
You must set the display format to either 4:3 PanScan, 4:3 Letter
Box,16:9 Wide Screen or Auto to get the maximum display when
watching TV.
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
Set LCN on or off.
To access the Menu, press MENU then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting.
Press EXIT to exit the menu.
Aspect Ratio
TV format
To access the menu,press MENU and select [Search Channel].
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
Resolution
If
the video does not appear correctly, change the setting. This
setting is to match the most common setting for HDMI.
Please note : HDMI-out can only be used in the TV mode, not
in the DVD model.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
If the video does not appear correctly, you need to change the
settings. This should match the most common setting for TVs in
your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
Channel Search
HDMI Aspect Ratio 16:9 Wide Screen
HDMI Resolution 1080i
TV Format PAL
Picture
ConfirmReturn
OK
EXIT
Auto Search
Manual Search
Country Germany
Channel Search
ConfirmReturn
OK
EXIT
11
First Time Installation
To Next Page
Loading...
Need help?
General
