SETUP Menu Setting
PAL - Select this if the connected TV is PAL system.It will change the
video signal of a NTSC disc and output in PAL format.
NTSC-Select this if the connected TV is NTSC system.It will change
the video signal of a PAL disc and output in NTSC format.
Auto:Change the video signal output automatic according to the
playing disk format.
Audio:Selects a language for audio (if available).
Subtitle:Selects a language for subtitle (if available).
Disc Menu:Selects a language for disc menu (if available).
Preference Page
Item
Standard requirement
Audio
:Speaker:1WX2, outputHeadphones
VIDEO OUT
AUDIO OUT
:1.4 Vrms (1 KHz, 0 dB)
Power requirements
Power consumption
Operating humidity
: AC 100-240 V , 50/60 Hz
: <10W
: 5 % to 90 %
Parameters and specifications
Electronical parameters
:Semiconductor laser, wavelength 650 nm
Signal system
: NTSC / PAL
Frequency
Signal-to-noise ratio
:More than 80 dB (ANALOG OUT connectors only)
Dynamic range
:More than 85 dB (DVD/CD)
Note: Design and specifications are subject to change prior notice.
: 20Hz to 20 kHz(1dB)
Output
System
Laser
response
N
Battery Specifications：
Output：7.4V
Charge / Discharge Time：
Standard charge time：3h ~ 4h
Storage and work circumstances：
1.
Storage circumstances Temperature Humidity
2.
Work circumstances Temperature Humidity
6 months
-20°C +45°C~
-20°C +65°C~
65±20%
65±20%
Standard charge
0°C +45°C~
65±20%
1 week
Battery Parameters
Standard discharge
-20°C +65°C~
65±20%
8
Battery Charging
Connect the DVD player to the supplied power adaptor, the LED
indicator will be RED when the battery is charging and will turn into
green when the battery is full charged.When battery is no power,
LED is OFF.
To Next Page
Loading...
Need help?
General
