LENCO DVP-9413 - Technical Specifications; Electrical Parameters; System Performance Specifications

12
Parameters and specifications
Electronical parameters
Item Standard requirement
Power requirements
: AC 100-240 V, 50/60 Hz
Power consumption
: <12W
Operating humidity
: 5 % to 90 %
Output
VIDEO OUT
: 1 Vp-p (75Ω)
AUDIO OUT
: 1.4 Vrms (1 KHz, 0 dB)
Audio
: Speaker: 1WX2, Headphones output
System
Laser
:Semiconductor laser, wavelength 650 nm
Signal system
: NTSC / PAL
Frequency response
: 20Hz to 20 kHz(1dB)
Signal-to-noise ratio
:More than 80 dB (ANALOG OUT connectors only)
Dynamic range
:More than 85 dB (DVD/CD)
Note: Design and specifications are subject to change without prior notice.
Battery Parameters
Battery Specifications:
Output: 7.4V
Charge/Discharge Time:
Standard charge time: 3h ~ 4h
Storage and work circumstances:
1. Storage circumstances Temperature Humidity
6 months -20°C~+45°C 65±20%
1 week -20°C~+45°C 65±20%
2. Work circumstances Temperature Humidity
Standard charge 0°C~+45°C 65±20%
Standard discharge -20°C~+65°C 65±20%
Important remarks for the reception of the TV channels :
- The base of the antenna is magnetic; for a better reception of the TV signal, if available,
put the base of the antenna on a metallic surface like the bodywork of a car, a fridge, a heating...
- The DVP-9413 can only receive non encrypted free TV channels.