20
Technical Specifications
Item Sub Item Parameter
Tuner
Input Frequency
170~230MHz
470~860MHz
RF Input level -79dBm(T), -75dBm(T2)
IF Bandwidth 7MHz and 8MHz
Modulation QPSK, 16QAM, 64QAM, 128QAM(T2), 256QAM(T2)
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
HEVC/H.265 HT@L4
MPEG2 MP@ML.HL
Output Format 480i, 480p,576i, 576P, 720P, 1080i, 1080P, 4:3 and 16:9
Output Port HDMI
Troubleshooting
Problem Potential Reasons What to do
No picture Power isn't connected Connect the power
The power switch is not on Switch on the power
Screen shows “No
Signal”
DVB-T cable not connected Plug in the DVB-T cable
Incorrect setting Reset setting
No sound from
speaker
Sound on mute Turn off mute function
Incorrect sound track Try another sound track
Only sound, no image
on the screen
No or incorrect connection with AV
cable
Make sure cables are connected correctly
The program is a radio program Press <TV/RADIO> key to shift into TV mode
Remote Control is not
responding
The battery is exhausted Change battery
Remote Control is not facing or
close enough to the Set Top Box
Adjust the position of the Remote Control and
move closer to the unit
The image stopped
suddenly or mosaic
The signal is too weak Strengthen the signal
To Next Page
Loading...
