LENCO DVT-2621 - Basic TV Operation; Powering the TV On and Off; Selecting Input Sources

Basic Operation
Basic Operation
Power on/off
1. Connect to the power with a power code, and turn on the switch(page 6).
2.-To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press TV/AV button on the TV set or remote control to display the input
source menu, and use CH+/- button on the TV set or
ġ
/
Ģ
button on
remote control to select the input source, press ENTER button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
Basic buttons on the remote control
POWER: Turn the TV on/standby.
MUTE: Press to mute the sound, press again or press VOL+ to unmute.
PMODE: Press repeatedly to cycle through the available video picture modes.
SMODE: Press to cycle through the different sound settings.
FREEZE: Catch the current picture.
NICAM/A2: TV Nicam/A2 select.
Number Buttons: Choose channel directly.
Press number buttons and press ENTER button to play the channel.
: Return to the previous channel viewed.
DISPLAY: Display the information of the current mode.
MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.
ASPECT: Press to change the screen display mode.
Thumbstick(
! ġĢ
): Allows you to navigate the on-screen menus and adjust the system
settings to your preference.
ENTER: CONFIRM button.
SLEEP: Shutdown timer.
TV/AV: Press to display the input source menu.
VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
FAV.list: Press to display the list of the favorite channels.
FAV.add: Press to add or delete the current channel to the list of the favorite channels.
Main:
TV
AV
S-Video
DVD
SCART
YPbPr
HDMI1
HDMI2
VGA
Multimedia
11