EasyManua.ls Logo

LENCO IPD-4500 - User Manual

LENCO IPD-4500
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IPD-4500
Pouch Speaker
for iPhone and iPod
The exclamation mark inside an equilateral triangle is intended to remind the user: Please note
the important operating and maintenance (servicing) instructions in the manual that comes with the
equipment.
Precaution: To prevent electric shock, please do not use a two-prong plug with an extension cord,
receptacle or other power supply outlet, unless the plug is completely inserted to prevent prong
exposure.
Warning: In order to reduce the risk of fire or electric shock, please do not expose this equipment
to rain or humid environments.
IMPORTANT IPD-4500 SAFETY INSTRUCTIONS
1. Please read all safety and operating instructions before operating the equipment.
2. Please retain the operating instructions in a safe place for future reference.
3. All warnings on the equipment and in the operating instructions should be heeded.
4. All operating instructions and use should be complied with.
5. Moisture and humidity – Please do not use this equipment in or near a bathtub, washbasin, kitchen
sink, damp basement or swimming pool.
6. Outdoor use – Warning: In order to reduce the risk of fire or electric shock, please do not expose this
equipment to rain or humid environments.
7. Location – the equipment should be installed in a stable location.
8. Ventilation – The location or position of installation should not affect normal ventilation. For
example, the equipment should not be placed on a bed, sofa, carpet, or similar surface, since that
may block the air vents; it also should not be placed in an enclosed space, such as an unventilated
bookcase or cabinet, etc.
9. Heat sources – The equipment should be kept far away from electric heaters, radiators, ovens, or
other heat generating equipment (including waste heat from other equipment).
10. Power supply – The power supply to which the equipment is connected should be of the type
described in the operating instructions or identified on the equipment itself.
For information and support, www.lenco.eu

Table of Contents

Other manuals for LENCO IPD-4500

Preview: User Manual
User Manual10 pages
Preview: Specifications
Specifications1 page

Questions and Answers

  • D
    Diane CantrellAug 10, 2025
    Why is my LENCO Racks & Stands remote control not working?
    • L
      Laura BurnsAug 10, 2025
      If the LENCO Racks & Stands remote control isn't working, it could be due to several reasons. First, ensure that you are within the effective control range of the IPD-4500 system. If there's an object blocking the signal between the remote and the system, remove it or move the remote. Finally, the remote control battery may be dead, so try replacing it.
  • B
    bethroseAug 15, 2025
    What to do if LENCO Racks & Stands battery power is insufficient?
    • N
      Nicole ShawAug 15, 2025
      If your LENCO Racks & Stands unit has insufficient battery power when not connected to an external power supply, you should recharge or replace the battery. Alternatively, you can plug the unit into an external power supply.
  • J
    jacquelinegutierrezAug 22, 2025
    Why is there distortion from my LENCO Racks & Stands audio source?
    • T
      Tammy JacobsAug 22, 2025
      If you are experiencing distortion from the audio source on your LENCO Racks & Stands, the sound quality of the audio files may be poor. Try using another audio source, such as a music CD, as .WAV and .MID files often produce distortion and noise when used with high-power loudspeakers.
  • F
    fergusonsharonAug 27, 2025
    What to do if LENCO Racks & Stands is too close to a radio tower?
    • K
      Katherine JohnsonAug 27, 2025
      If your LENCO Racks & Stands is experiencing interference, it might be too close to a radio tower. Try moving the loudspeakers to see if the interference disappears. You can also buy a shielded cable at your local electronics store.
  • M
    Michael RamosSep 2, 2025
    What to do if sunlight affects LENCO Racks & Stands remote control sensor?
    • C
      Caitlyn PerrySep 3, 2025
      If direct sunlight or other light is affecting the remote control sensor of your LENCO Racks & Stands, reposition the IPD-4500 system.

Summary

Important Safety Instructions

General Operating Precautions

Read all safety and operating instructions, retain for reference, heed warnings, and comply with use instructions.

Environmental and Location Safety

Avoid moisture, humidity, bathtubs, sinks, damp areas, and ensure stable, well-ventilated location.

Heat Sources and Power Supply

Keep away from heat sources and use specified power supply type.

Power Cord, Cleaning, and Storage

Protect power cord, clean with dry cloth, unplug if unused for long periods.

External Hazards and Servicing

Placement of the IPD-4500 System

iPod;iPhone Connection

To Play Music

Basic Operation

Volume Control

Using the Remote Control

Built-in NI-MH Rechargeable Batteries

Charging and Indicator Lights

Battery Specifications and Usage Guidelines

Replacement of Built-in Rechargeable Batteries

Troubleshooting

Common Problems and Solutions

Addresses issues like no power, mute speakers, distorted sound, and remote control problems.

LENCO IPD-4500 Specifications

General IconGeneral
Impedance4 Ω
Headphone outputs1
Line-inYes
ColorBlack
Audio output channels2.0
Connectivity technologyWired