5. Playing Your Record
Play the record you want to record by following the procedure described in the section
“LISTENING TO A RECORD”
6. Adjusting Input and Output
Adjust the output and input volume.
7. Recording
8. Select the RECORD button to start recording while your record is playing.
You will need to position the needle on the record for a few seconds before the track starts, so
that you select the RECORD button at the beginning of your track.
Start playback on the USB turntable. You will see the waveform of the audio on the screen as it is
recording. You will hear the audio coming from the output of your computers soundcard.
No Audio? - go back to the preference menu and make sure you have “Software Playthrough”
selected and the speaker volume up on your computer.