LENCO L-92 - Page 14

14
Turntable Section:
Type:
2-speed full manual
Motor:
Miniature permanent magnet DC brushes
Driving Method:
Belt drive
Turntable Platter:
332mm (Aluminum)
Speeds:
33 and 45rpm
Wow and Flutter:
Less than 0.3% WRMS (JIS WTD) with 33 rpm
S/N Ratio:
More than 50dB (DIN-B)
Pitch Controls:
+/- 50%
Starting Torque:
N/A
Braking System:
Electronic brake
Starting Time:
Less than 2 sec.
Braking Time:
Less than 2sec.
Time for Speed Change:
Less than 2 sec. from 33 to 45 rpm.
Less than 2 sec. from 45 to 33 rpm.
USB Function:
PC link (recording from turntable to computer by USB port)
Computer interface:
USB 1.1 compliant 7/8/10 or MAC OSX
Tonearm section:
Type:
Static balanced S-shaped tone arm
Effective Arm Length:
200mm
Overhang:
10mm
Tracking Error Angle:
Less than 3 degree
Tracking Force Adjustment Range:
3-4g
Cartridge MM Type:
Audio Technica AT-3600L
Stylus pressure:
3.0±0.5g
Cartridge weight:
2.5±0.5g
Anti-skating Range:
0~4g
Channel Separation:
More than 18 dB
Channel Balance:
Within 2.5dB at 1KHz
Pre-Amplifier
Output:
150mV +/-4dB (IN: 2.5mV 1KHz)
RIAA (Frequency Response):
20Hz~20KHz +1/-3dB (IN: 1.5mV 1KHz)
Power supply adaptor
Use only the power supply listed in the user instructions