MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating
voltage of the unit. Your unit is ready to be connected to a correct voltage
of your location.
AMPLIFIER CONNECTION
Connect RCA line out cable (10) to the AUX input on your amplifier:
Red plug into R channel input.
White plug into L channel input.
- Place the record of your choice on the turntable. If it is a 45 rpm, do
not forget to place the adaptor (1) on the record spindle.
- Choose the desired playing speed:
33 rpm -> button unlocked
45 rpm-> button locked.
- Release the pick-up arm clip.
- Place the cartridge vertically over the first track of the record, the
turntable starts turning.
- When the record is over, the pick-up arm returns to its rest , the
turntable stops turning
Take care that the pick-up lift stick is in forward-turned (lift down),
close pick-up arm lock to secure pick-up arm.
TECHNICAL SPECIFICATION
Power Supply: 230V, 50Hz
Power Consumption: <10W
Wow & Flutter: 0.25%
Distortion: 3%~4%
S/N: 50 dB
Audio Output Voltage: 500mV ±200mV
USB: 5V/500 Ma
To Next Page
Loading...
