LENCO PMX-240 - Page 11

OPERATING
11
TUNER APPLICATIONS
1. Before using the radio funcons, you must adjust the antenna to obtain opmum recepon.
Press the INPUT A key on the front panel or the FM key on the remote control, to select “FM” funcon.
2. Press the AUTO key on the remote control or the play buon of the INPUT A control panel.
The machine will scan radio channels from low- frequency to high-frequency by itself and stores the
channels found one by one.
3. Press the CH+/CH- key on the remote control to change radio presets that have been stored
previously.
4. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.
5. To select radio staons from the control panel, press and hold the next/prev buons.
KARAOKE & GUITAR FUNCTION
1. The machine can auto detect whether a MICROPHONE or GUITAR is connected.
2. Please turn off the microphone volume with the MIC.VOL knob on the front panel and adjust the
volume gradually aer inserng the microphone. Remark: The PMX-240 is delivered with a wireless
microphone using 2AA baeries (not included). When you switch the buon to “ON”, you can speak
in it and adjust volume and echo on the control panel.
3. Adjust the ECHO knob on the front panel to change the microphone ECHO.
4. Adjust the GUITAR VOL knob on the front panel to change the guitar VOLUME.
Note: Do not touch the top of the microphone when singing in order to avoid howling effect.
Adjust the microphone volume gradually to avoid howling effect.
BLUETOOTH PAIRING AND CONNECT
• Turn off any Bluetooth devices previously paired (linked) with this unit.
• Turn on the Bluetooth feature on your phone or music player.
• Turn on and set this unit to Bluetooth mode. The flashing blue light “BT” on LED display indicates it is in
pairing mode.
• Set your phone or music player to search for Bluetooth devices.
• Select ‘PMX-240’ from search results on your phone or music player.
• Select OK or YES to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey steady blue light indicates successful connecon.
• Press the DISCONNECT key on the remote control to disconnect the Bluetooth.